Honda Civic Service Manual: Transmission Assembly
- M/T Countershaft Assembly Clearance Inspection (K24Z7)
- M/T Countershaft Assembly Clearance Inspection (R18Z1 M/T)
- M/T Countershaft Bearing Replacement (K24Z7)
- M/T Countershaft Bearing Replacement (R18Z1 M/T)
- M/T Countershaft Disassembly, Reassembly, and Inspection (K24Z7)
- M/T Mainshaft Assembly Clearance Inspection (K24Z7)
- M/T Mainshaft Assembly Clearance Inspection (R18Z1 M/T)
- M/T Mainshaft Bearing and Oil Seal Replacement (R18Z1 M/T)
- M/T Mainshaft Disassembly, Reassembly, and Inspection (R18Z1 M/T)
- M/T Mainshaft Thrust Clearance Adjustment (K24Z7)
- M/T Reverse Shift Fork Clearance Inspection (K24Z7)
- M/T Reverse Shift Fork Clearance Inspection (R18Z1 M/T)
- M/T Shift Fork Clearance Inspection (K24Z7)
- M/T Shift Fork Disassembly and Reassembly (K24Z7)
- M/T Shift Fork Disassembly and Reassembly (R18Z1 M/T)
- Synchro Ring and Gear Inspection (K24Z7)
- Synchro Ring and Gear Inspection (R18Z1 M/T)
- Synchro Sleeve and Hub Disassembly, Reassembly, and Inspection (K24Z7)
Clutch Pressure Plate Removal and Installation (K24Z7)
Removal
1.
Pressure Plate
1.
Install the ring gear holder.
2 ...
M/T Countershaft Assembly Clearance Inspection (K24Z7)
Removal
1.
M/T Change Lever Assembly
1.
Remove the interlock bolt (A).
...
See also:
Honda Civic Owners Manual. Oil Check
We recommend that you check the engine oil level every time you refuel.
Park the vehicle on level ground.
Wait approximately three minutes after turning the engine off before you check
the
oil.
Remove the dipstick (orange).
Wipe the dipstick with a clean cloth or
paper towel ...
© 2016-2026 Copyright www.hocivic.com
0.0283