Honda Civic manuals

Seat Ibiza (6F) 2017-2026 Owner's Manual: Wheel nut caps

Seat Ibiza wheel showing protective caps fitted over the wheel nuts and the tool used to remove them
Fig. 184 Wheel: wheel nuts with caps.

Removal

The protective caps fitted over the wheel nuts help shield the fastening components from dirt, moisture and other contaminants encountered during normal driving. They also contribute to the finished appearance of the wheels. Whenever a wheel has been removed or a tyre has been changed, the caps should be reinstalled over their corresponding wheel nuts. Press each cap into position until it is properly seated, and check that it cannot easily become detached while the vehicle is moving.

The anti-theft wheel locking bolt is equipped with a specially shaped protective cap that differs from those used on standard wheel nuts. This cap is designed specifically to fit the anti-theft fastening head and must not be interchanged with ordinary wheel nut caps. Similarly, a standard cap should not be forced onto the anti-theft bolt. Using the correct cap ensures a proper fit and allows the protective covering to be removed when access to the locking bolt is required.

Anti-theft wheel nuts

Seat Ibiza anti-theft wheel locking bolt with its protective cap and special removal adapter
Fig. 185 Anti-theft wheel nut with cap and adapter.

Anti-theft wheel nuts or locking bolts are designed to make unauthorised wheel removal more difficult. Unlike conventional wheel fasteners, they have a specially shaped head that requires a matching adapter for loosening and tightening. The correct adapter is supplied as part of the vehicle's equipment and must be used whenever the locking fastener needs to be removed. Keep the adapter accessible when preparing to change a wheel, as a conventional wheel wrench cannot engage directly with the anti-theft fastening head.

Loosening the anti-theft wheel nut

Note Record the identification code associated with the anti-theft wheel locking bolt and keep this information in a secure place outside the vehicle. The code identifies the matching adapter and may be required if the original adapter is lost or damaged. If a replacement is needed, an authorised SEAT Service centre can use the recorded code number to obtain the appropriate adapter. Keeping the code separately from the vehicle helps ensure that the information remains available when required without unnecessarily compromising the security provided by the locking bolts.

Tyre pressure monitor system
Tyre pressure monitor indicator Fig. 190 Instrument cluster: warning indicator signalling a possible loss of tyre pressure. The tyre pressure monitoring system in the Seat Ibiza uses inf ...

Loosening wheel nuts
Fig. 186 Tyre change: loosen the wheel nuts. Fig. 187 Tyre change: tyre valve 1 and the correct position for the anti-theft wheel locking bolt 2 or 3. Use only the wheel wrenc ...

See also:

Honda Civic Service Manual. Fuel Pressure Regulator Removal and Installation (R18Z1)
121135 Removal 1. Fuel Filler Cap 1. Remove the fuel fill cap to relieve the pressure in the fuel tank. 2. HDS DLC - Connection ...

Nissan Kicks - OM - Seats - Wheels and tires - Audio system -
© 2016-2026 Copyright www.hocivic.com

0.0249