
Fig. 186 Tyre change: loosen the wheel nuts.

Fig. 187 Tyre change: tyre valve 1 and the correct position for the
anti-theft wheel locking bolt 2 or 3.
Use only the wheel wrench supplied with your Seat Ibiza when loosening the wheel nuts or bolts. The original wheel wrench is intended for the vehicle's wheel fasteners and provides the appropriate fit for carrying out the wheel-changing procedure. Using an unsuitable wrench can damage the fastening heads or cause the tool to slip while force is being applied. Before beginning, make sure that the wrench is correctly seated on the fastener and that the vehicle is parked securely with the parking brake applied.
The wheel nuts must be loosened while the vehicle is still resting firmly on the ground. Turn each fastener approximately one full revolution anticlockwise before raising the vehicle with the jack. At this stage, the fasteners should remain engaged in the wheel hub and must not be removed completely. Loosening them while the tyre is in contact with the ground prevents the wheel from rotating freely and reduces the risk of destabilising the vehicle while it is supported by the jack.
If a wheel nut is particularly tight and cannot be loosened using normal hand pressure, carefully apply additional force to the end of the wheel wrench with your foot. Before doing so, check that the wrench is fully engaged with the fastener and positioned securely. Apply pressure in a controlled manner rather than striking or jumping on the tool. Excessive or sudden force can cause the wrench to slip, damage the fastening components or result in injury.
When applying force with your foot, hold onto a stable part of the vehicle to help maintain your balance. Make sure that the ground is firm and that your footwear provides adequate grip. Keep your body positioned so that you will not fall against the vehicle or onto the road if the fastener suddenly loosens. If the wheel nut remains difficult to turn or appears damaged, seek assistance from a qualified specialist rather than continuing to apply excessive force.
Loosening wheel nuts
Important information about wheel nuts
The wheel rims and fastening nuts or bolts installed at the factory are selected as compatible components during vehicle manufacture. Their dimensions, fastening surfaces and mechanical characteristics are matched to the wheel and hub arrangement of the Seat Ibiza. For this reason, when replacing the original rims with different wheels, it is essential to use wheel fasteners that are specifically suitable for the new rims.
Alternative wheel designs may require fasteners with a different length or a different shape of seating surface. The correct fasteners must engage properly with the wheel and hub and provide the intended clamping force when tightened to the specified torque. A wheel nut or bolt that appears to fit the thread is not necessarily suitable for securing a particular wheel rim. Compatibility must be established before the wheels are installed.
Using the correct wheel fasteners ensures that the wheels are attached securely and remain properly positioned during driving. Secure attachment is essential because the wheel assembly is subjected to considerable forces during acceleration, braking and cornering. Correctly matched wheel components also help maintain the clearances and mounting arrangement required for the braking system to function as intended.
In some circumstances, wheel fasteners taken from another vehicle may not be suitable even when that vehicle is the same model. Differences in wheel design, equipment or approved rim specifications can require different fastening components. Never assume that wheel nuts or bolts are interchangeable solely because they come from another Seat Ibiza. If the correct fastener type is uncertain, consult an authorised SEAT Service centre or a qualified wheel specialist before installation.
On wheels fitted with integral hubcaps or full-size wheel covers, the position of the anti-theft wheel locking bolt is particularly important. The locking bolt must be installed in one of the designated positions marked 2 or 3 in Fig. 187, using the tyre inflation valve at position 1 as the reference point.
This arrangement ensures that the wheel cover can be installed correctly without interference from the anti-theft fastening head. If the locking bolt is fitted in an incorrect position, the hubcap may not align with the wheel or may be impossible to secure properly. Check the position of the locking bolt before refitting the wheel cover, and make sure that the cover's valve opening is aligned with the tyre valve.
WARNING Wheel nuts or bolts that are incorrectly installed or insufficiently tightened may loosen while the vehicle is moving. If a wheel becomes insecure or detaches from the vehicle, the driver may lose steering control, potentially causing a serious accident and severe injuries. Correct wheel fastening is essential for the safe operation of the Seat Ibiza. Always use suitable fasteners, follow the prescribed tightening procedure and ensure that the required tightening torque is achieved.
Wheel nut caps
Tyre repairHonda Civic Service Manual. Moonroof Wind Deflector Removal and Installation (4-door)
814160
Removal
1.
Moonroof Deflector
1.
Open the glass fully.
2.
Remove ...