Lights up red
The red seat belt warning indicator illuminates when the driver or front passenger has not fastened their seat belt. This warning draws attention to an occupant who is not properly restrained and reminds them to secure their belt before the vehicle begins moving. A correctly fastened seat belt is essential for maintaining the intended seating position and reducing the risk of injury during sudden braking or a collision.
The control lamp serves as a visual reminder that the driver must fasten their seat belt. Depending on the vehicle's equipment and the conditions detected by the restraint monitoring system, the indication may also relate to the front passenger. The warning should not be ignored, even when the Seat Ibiza is being used for a short journey or travelling at a low speed.
Before starting the vehicle, check that all occupants are seated correctly and that their restraint systems are properly secured. The following precautions should be completed before setting off:
If the vehicle begins moving and its speed exceeds approximately 25 km/h (15 mph) while a monitored seat belt
remains unfastened, an audible warning sounds for several seconds. The same warning can be triggered if a seat
belt is released while the vehicle is already moving. At the same time, the seat belt warning lamp
flashes on the instrument
cluster display. The combination of a flashing visual indication and an audible signal is intended to attract
the driver's attention to the unfastened restraint so that the situation can be corrected safely.
The warning lamp
goes out when the driver and front passenger seat belts are correctly fastened with the ignition switched on. If
the indicator remains illuminated, check that the relevant belts have been inserted securely into their buckles.
The disappearance of the warning does not replace the need to ensure that the belt webbing is positioned
correctly across each occupant's body.
Rear seat belts fastened display

Fig. 18 Instrument cluster: indication of the
status of the rear seat seat belts.
Depending on the Seat Ibiza version and installed equipment, the instrument cluster can display the fastening status of the rear seat belts when the ignition is switched on. The indication illustrated in Fig. 18 allows the driver to check whether occupants in the rear seating positions have secured their belts. This is particularly useful before starting a journey, as the driver can review the displayed information without having to turn around to inspect each rear seat individually.
The rear seat belt status display uses different colours to distinguish between an unoccupied seat, an occupied seat with its belt fastened and an occupied seat with its belt unfastened. The symbols correspond to the individual rear seating positions, making it possible to identify which seat requires attention. The indications depend on the seat occupancy and belt status information available to the vehicle's monitoring system.
A
white symbol indicates that the corresponding rear seating position is unoccupied. The display
identifies the seat as empty, so no occupant seat belt fastening status is shown for that position. The driver
should nevertheless check that any passengers entering the vehicle subsequently fasten their belts before the
journey continues.
A
green symbol indicates that the corresponding rear seat is occupied and its seat belt is
fastened. This confirms the fastening status detected by the system for that seating position. The occupant must
still ensure that the belt is worn correctly, with the webbing lying flat and following the appropriate path
across the shoulder, chest and pelvis.
A
red symbol indicates that the corresponding rear seat is occupied but its seat belt is not
fastened. The driver should ensure that the occupant secures the belt correctly before setting off. If the
indication appears during a journey, the belt should be fastened again as soon as it is safe to do so.
If a rear passenger releases their seat belt while the Seat Ibiza is moving, the corresponding
symbol remains illuminated in red for that seating position. The red warning indicator also flashes on the
instrument cluster display to alert the driver to the change in fastening status. When the vehicle is travelling
faster than approximately 25 km/h (15 mph), an audible warning sounds for several seconds. This notification
helps the driver recognise that a rear passenger is no longer restrained and that the belt must be fastened
again.
Whenever a rear seat belt is
fastened or unfastened while driving, the instrument cluster displays the rear seat belt status for
approximately 30 seconds. This temporary indication allows the driver to identify the seating position concerned
and verify the reported change. It is particularly helpful when passengers adjust their belts during a journey,
although the driver should continue to concentrate on traffic and avoid becoming distracted by the display.
Introduction
Head-on collisions and the laws of
physicsHonda Civic Owners Manual. Protecting Larger Children-Final Checks
Your vehicle has a rear seat where children can be properly restrained. If
you ever
have to carry a group of children, and a child must ride in front:
Make sure you read and fully understand the instructions and safety
information
in this manual.
Move the front passenger seat as far ba ...