Honda Civic manuals

Seat Ibiza (6F) 2017-2026 Owner's Manual: Removing and installing a wheel

Once the wheel nuts have been loosened and the Seat Ibiza has been safely raised using the jack, the wheel can be removed and replaced. Before proceeding, make sure the vehicle is stable, the jack is correctly positioned at the designated lifting point, and the wheel being changed is clear of the ground. Follow the removal and installation sequence carefully to avoid damaging the wheel, its fasteners or the surrounding brake components.

During wheel removal or installation, the inner surface of the rim may accidentally come into contact with the brake disc, potentially causing scratches or other damage. Handle the wheel carefully and keep it properly supported as it is moved away from or towards the hub. Having a second person assist with the procedure is recommended, particularly when handling a heavy wheel or when precise alignment is difficult.

Taking off the wheel

Putting on the spare wheel

Before installing the replacement wheel, check whether the tyre has a directional tread pattern. If a rotation direction is specified on the sidewall, take this into account when positioning the wheel. Also examine the spare wheel for visible damage and make sure its mounting surfaces are clean and suitable for installation.

Tightening torque of the wheel nuts

The specified tightening torque for the wheel nuts on the Seat Ibiza is 120 Nm for both steel wheels and alloy wheels. This torque value is essential for securing the wheel correctly to the hub. Insufficient tightening can allow the wheel nuts to loosen during driving, while excessive tightening may damage the fasteners, threads or wheel mounting surfaces.

After replacing a wheel, have the tightening torque checked immediately using a properly functioning and accurately calibrated torque wrench. The wheel wrench supplied with the vehicle is suitable for loosening and initially tightening the wheel nuts, but it does not provide a precise measurement of the applied torque. A torque wrench is therefore necessary to confirm that all fasteners have been tightened to the required 120 Nm.

All wheel nuts must be clean, in good condition and capable of being screwed into their threads smoothly without excessive resistance. Before installation, inspect the fasteners for visible corrosion, damaged threads or other defects that could prevent correct engagement. A wheel nut that does not turn freely should not be forced into position, as this may damage the threaded connection.

Before fitting the spare wheel, examine its general condition and inspect the mounting surfaces of both the wheel and the hub. Look for accumulated dirt, rust, foreign material or visible damage that could interfere with proper seating. The wheel must rest evenly against the hub when installed, without any material trapped between the contacting surfaces.

The wheel mounting surfaces and the corresponding hub contact area must be clean before the replacement wheel is fitted. Remove any dirt or loose contamination that could prevent the wheel from sitting flush against the hub. Proper contact between these surfaces is necessary to maintain a secure connection once the wheel nuts have been tightened.

If any wheel nuts are heavily corroded or difficult to screw into place, have them replaced before the final tightening torque is checked. The threads in the wheel hub must also be cleaned and inspected to ensure that the fasteners can engage correctly. Do not attempt to compensate for damaged or obstructed threads by applying additional force with the wheel wrench.

Never lubricate the wheel nuts or the threaded holes in the wheel hub with grease, oil or similar substances. Lubrication changes the friction characteristics of the threaded connection and can affect the clamping force produced when the nuts are tightened. Even when a lubricated fastener has been tightened to the specified torque, it may subsequently loosen during driving. Wheel nuts and hub threads must therefore remain clean, dry and free from lubricants.

Tyres with directional tread pattern

Some tyres fitted to the Seat Ibiza feature a directional tread pattern designed to provide its intended performance when the wheel rotates in a specific direction. These tyres can be identified by an arrow marked on the tyre sidewall, which indicates the correct direction of rotation when the vehicle is moving forwards. Always check this marking before installing a directional tyre and ensure that the wheel is fitted on the appropriate side of the vehicle.

Observing the specified rotation direction is particularly important for maintaining effective road grip and water evacuation. A correctly mounted directional tread helps channel water away from the contact area between the tyre and the road, reducing the risk of aquaplaning on wet surfaces. Correct rotation also contributes to the tyre's intended handling characteristics and helps limit unnecessary tread noise and uneven or excessive wear.

If a directional tyre has been installed so that it rotates opposite to the direction indicated by the manufacturer, drive with extreme caution. The tread pattern will no longer operate as intended, and its ability to disperse water and maintain grip may be reduced. This is especially important when driving on wet roads, where incorrect tyre rotation can adversely affect traction and vehicle stability.

A directional tyre fitted in the wrong orientation should be corrected as soon as possible. Arrange for the tyre to be remounted in the proper rotation direction or replace it with a correctly fitted wheel. Until the problem has been resolved, adapt your driving to the road conditions, avoid unnecessary speed and allow additional distance for braking, particularly when the road surface is wet.

Works after changing a wheel

After installing the replacement wheel on the Seat Ibiza, complete the following checks and procedures before returning to normal driving. These steps help ensure that the wheel is properly secured, the tyre is correctly inflated and all equipment used during the wheel change has been safely stored.

Raise the vehicle
Fig. 188 Location of the designated vehicle jacking points. Fig. 189 Cross member: correct positioning and engagement of the vehicle jack. When changing a wheel on the Seat Ibiza ...

Tyre pressure monitor system
Tyre pressure monitor indicator Fig. 190 Instrument cluster: warning indicator signalling a possible loss of tyre pressure. The tyre pressure monitoring system in the Seat Ibiza uses inf ...

See also:

Honda Civic Owners Manual. Lane Keep Support Function
Provides assistance to keep the vehicle in the center of the lane. When the vehicle nears a white or yellow line, steering force of the electric power steering will become stronger. Lane Keep Support Function The LKAS may not function as designed while driving in frequent ...

Nissan Kicks - OM - Seats - Wheels and tires - Audio system -
© 2016-2026 Copyright www.hocivic.com

0.0103