
Fig. 100 On the multifunction steering wheel:
cruise control operation buttons.
Connecting
button on the multifunction
steering wheel to switch on the cruise control system.
At this stage, no cruising speed has been stored and automatic speed regulation has not yet started. The system is switched on and ready for the driver to select a speed, but the Seat Ibiza continues to respond directly to accelerator and brake pedal inputs until regulation is activated.
Start regulation
The cruise control system stores the vehicle's current speed and begins regulating it automatically. The Seat Ibiza then attempts to maintain this selected speed without requiring the driver to keep the accelerator pedal depressed. Continue monitoring traffic and road conditions, and be ready to brake or interrupt the function whenever necessary.
Adjusting the speed
When the cruise control system (GRA) is active, the driver can increase or decrease the stored speed using the corresponding controls on the multifunction steering wheel. The available adjustments allow small changes for fine-tuning the cruising speed or larger changes when a more substantial increase or reduction is required. The selected value is updated according to the control used:
+1
km/h (1 mph). Increases the stored cruising speed by one increment, allowing a small upward
adjustment without resetting the system.
-1
km/h (1 mph). Reduces the stored cruising speed by one increment, providing a precise adjustment
when a slightly lower speed is required.
+10 km/h (5 mph). Increases the selected speed by a larger increment, allowing the driver to
change the cruising speed more quickly when road and traffic conditions permit.
-10
km/h (5 mph). Decreases the selected speed by a larger increment, making it possible to select a
lower cruising speed without repeatedly making individual small adjustments.
The cruise control system regulates vehicle speed through acceleration control only; it does not automatically apply the brakes to slow the Seat Ibiza. Consequently, the vehicle may exceed the stored speed in certain situations, such as when travelling downhill. If the actual speed becomes too high or traffic conditions require deceleration, the driver must apply the brakes and take control of the vehicle's speed. Cruise control should never be relied upon to maintain a safe speed on a descent without driver intervention.
Interrupting the adjustment
button on the
multifunction steering wheel, or press the brake pedal. Either action interrupts active cruise control
regulation, allowing the driver to control the vehicle's speed directly without switching off the entire
system.The previously selected cruising speed remains stored after regulation has been interrupted. This means that the driver can resume the same speed later without having to enter it again, provided the cruise control system remains switched on and its operating requirements are satisfied.
Reinstating the cruise control
button to
resume cruise control regulation using the speed stored before the interruption. Before doing so, make sure
that the saved speed is appropriate for the current traffic and road conditions.The cruise control system resumes operation and attempts to bring the Seat Ibiza back to the previously stored speed. Once that speed is reached, the system continues regulating it within its operating limits. The driver must remain attentive during this process, particularly if the stored speed is higher than the vehicle's current speed.
Switching off
button on the
multifunction steering wheel to switch off cruise control completely. This ends the current cruise control
operation rather than merely suspending speed regulation.The cruise control system is deactivated and the previously stored speed is deleted. If the driver wishes to use cruise control again, the system must be switched on and a new cruising speed selected. The instrument cluster indication changes to reflect the system's inactive status.
Switching off the speed limiter
When the speed limiter is selected, the cruise control system is switched off. The two functions are distinct: cruise control is intended to maintain a selected speed, while the speed limiter is used to help prevent the vehicle from exceeding a selected speed limit. Check the instrument cluster to identify which function is currently selected.
Troubleshooting
Fault in the speed regulator
The corresponding control lamp illuminates yellow on the instrument cluster, indicating that the cruise control system has detected an abnormal operating condition or malfunction. The system may no longer be able to maintain the selected speed reliably, and normal cruise control operation should not be assumed while this warning is displayed.
If the speed regulator is not functioning correctly, switch off the cruise control system and have the Seat Ibiza inspected by a qualified specialist workshop. The cause of the malfunction should be identified before the function is used again. Until the fault has been corrected, control the vehicle's speed manually and continue observing the surrounding traffic.
The adjustment is interrupted unexpectedly
Introduction
Speed limiterHonda Civic Service Manual. LaneWatch Camera Aiming
1.
LaneWatch Camera Aiming
NOTE: The LaneWatch camera must be aimed after one or more of
the following procedures are done:
LaneWatch camera ...