The cruise control system (GRA) allows the driver to select a desired driving speed and helps the Seat Ibiza maintain that speed without continuously pressing the accelerator pedal. This function is particularly useful on roads where traffic conditions permit steady driving over longer distances. Once activated, the system automatically adjusts engine power to maintain the stored speed as far as operating conditions allow. However, cruise control does not replace the driver's responsibility for monitoring traffic, maintaining a safe following distance or braking whenever necessary.
Speed range
The cruise control system can be used when the Seat Ibiza is travelling in a forward gear at a speed above approximately 20 km/h (15 mph). Below this operating threshold, the system cannot maintain the selected speed through normal cruise control regulation. The driver should only activate the function when the vehicle is moving at an appropriate speed and the road conditions allow safe, consistent progress without frequent braking or sudden changes in speed.
Temporarily switching off the cruise control
The driver can exceed the stored cruising speed at any time by pressing the accelerator pedal, for example when overtaking another vehicle or temporarily increasing speed to suit the traffic situation. While the vehicle is accelerating beyond the selected speed, cruise control regulation is temporarily suspended and the driver controls acceleration directly. Once the accelerator pedal is released, the system resumes regulation using the previously stored speed, provided the operating conditions are still satisfied. This allows a temporary increase in speed without having to select the original cruising speed again.
Status display
When cruise control is switched on, the Seat Ibiza instrument cluster displays information about the system's operating status and the selected cruising speed. The colour of the corresponding indicator shows whether the function is merely switched on or is actively regulating the vehicle's speed. These indications help the driver distinguish between a system that is ready for use and one that is currently maintaining the stored speed.
Illuminates grey.
The cruise control system is switched on, but automatic speed regulation is not currently active. The function is available for use, although the driver must continue controlling the vehicle's speed with the accelerator and brake pedals until regulation is started or resumed.
Illuminates green.
The cruise control system is switched on and actively regulating the vehicle's speed. The Seat Ibiza is attempting to maintain the stored cruising speed according to the current driving conditions, while the driver remains responsible for steering, observing the road and braking when required.
If no cruising speed has been stored, the instrument cluster displays three dashes (---) instead of a numerical speed value. This indicates that the system does not currently have a selected speed to maintain. A speed must be stored before automatic regulation can begin.
Changing gears
In vehicles equipped with a manual transmission, pressing the clutch pedal temporarily suspends cruise control regulation. This allows the driver to change gear without the system attempting to maintain the selected speed during the gear change. Once the gear change has been completed and the clutch pedal is released, regulation resumes automatically, provided the necessary operating conditions are met. The previously selected cruising speed remains stored during this temporary interruption.
WARNING Using cruise control when the vehicle cannot safely maintain a constant speed or when there is insufficient distance to brake can lead to dangerous situations, accidents and serious injuries. The system is intended for driving conditions that allow steady progress and does not automatically adapt to every hazard, change in road conditions or movement of surrounding traffic. The driver must always be prepared to intervene immediately.
Operating the cruise controlHonda Civic Owners Manual. Speed Dial
Up to 20 speed dial numbers can be stored per phone.
To store a speed dial number:
Press the button or
the button.
Rotate to select Speed
Dial, then press
.
Rotate to select Add
New, then press
.
Rotate to select a
place to choose a
number f ...