Seat Ibiza (6F) 2017-2026 Owner's Manual: New wheels and tyres
Wheel and tyre maintenance, replacement and installation should preferably be carried out by a qualified
specialist workshop. Professional tyre technicians have the technical knowledge, dedicated equipment and
appropriate replacement parts needed to perform these operations correctly. They can also verify that the
selected tyres, wheel rims and fastening components are compatible with the specifications of your Seat Ibiza.
Correct fitting is essential for safe handling, reliable braking and the proper operation of the vehicle's
running gear. Tyre replacement involves more than fitting rubber to a rim: the wheels must be installed
securely, and the finished assembly must be suitable for the vehicle and its intended operating conditions.
- Even winter tyres cannot provide unlimited grip on icy roads. Their tread design and rubber characteristics
are intended to improve traction in cold conditions, but braking distances and cornering grip can still be
severely reduced on ice. When new tyres have been installed, drive cautiously during the first 600 km
(approximately 300 miles), maintaining a moderate speed and avoiding sudden acceleration, harsh braking and
abrupt steering movements. Newly fitted tyres require an initial running-in period before they develop their
full grip characteristics. Exercise particular care on wet, icy or otherwise slippery surfaces, regardless
of the type of tyre fitted.
- All four wheels must be equipped with tyres of the same type and size, including the same specified rolling
circumference. Wherever possible, the tyres should also have matching tread patterns. Using tyres with
different characteristics can result in inconsistent grip, steering response and braking behaviour between
the wheels. This may affect vehicle stability, particularly during cornering, sudden manoeuvres or driving
on slippery roads. When selecting tyres for the Seat Ibiza, make sure that the complete set meets the
vehicle manufacturer's approved specifications rather than relying solely on the apparent similarity of the
tyres.
- When replacing worn or damaged tyres, avoid changing only one tyre if this would leave a significant
difference between the tyres fitted to the same axle. Replace at least two tyres together on the same axle
so that both wheels have comparable characteristics and tread condition. Tyres with substantially different
wear levels or construction may respond differently during braking and cornering, potentially affecting the
vehicle's handling balance. Before fitting replacements, have the condition of the remaining tyres assessed
to determine whether they are suitable for continued use.
- If you intend to install a combination of tyres and wheel rims that differs from the original factory
equipment, consult a qualified specialist workshop before purchasing the components. Provide the workshop
with the vehicle's details and the specifications of the proposed wheels and tyres so that compatibility can
be checked in advance. Alternative wheel combinations must meet the applicable requirements for dimensions,
load capacity, clearance and secure installation. A wheel and tyre combination should not be considered
suitable merely because it can be physically mounted on the vehicle. Obtaining professional advice before
purchase helps prevent fitting problems and ensures that the selected components are appropriate for your
Seat Ibiza.
The wheel rim and tyre sizes approved for your Seat Ibiza are specified in the vehicle's official documentation.
Depending on the country in which the vehicle is registered, this information may be included in the EC
Certificate of Conformity, commonly referred to as the COC document, or in other relevant vehicle approval
documents. These records identify the wheel and tyre combinations authorised for the particular vehicle
configuration. Because documentation requirements and the information provided can vary between countries,
consult the documents supplied with your vehicle when checking permitted sizes. If the approved combinations are
unclear, an authorised SEAT Service centre or qualified specialist workshop can help identify the appropriate
specifications. The fact that a tyre or rim has dimensions similar to the original equipment does not
automatically mean that it is approved for use.
If the spare wheel differs from the wheels normally fitted to the vehicle, it must be regarded as a temporary
replacement. This situation may arise when the Seat Ibiza is equipped with winter tyres, particularly wide tyres
or another wheel and tyre combination that does not match the spare wheel. If a puncture makes it necessary to
install a different spare wheel, use it only for the period required to reach a suitable repair facility or
restore the normal wheel arrangement. Drive cautiously, avoid unnecessary journeys and observe any restrictions
associated with the spare wheel. Differences in tyre dimensions, tread characteristics or wheel construction can
influence the vehicle's handling and braking response. The damaged tyre should be repaired or replaced as
appropriate, and the normal road wheel must be refitted as soon as possible.
On vehicles equipped with four-wheel drive, matching tyre characteristics are particularly important because the
drivetrain distributes power between the wheels. All four wheels must be fitted with tyres of the same brand,
type and tread pattern to prevent differences in their rolling behaviour from placing unnecessary stress on the
traction system. Tyres with different rolling circumferences can rotate at different speeds even when the
vehicle is travelling in a straight line. Such differences may interfere with the intended operation of the
drivetrain and potentially damage its components. For this reason, if a puncture occurs on a four-wheel-drive
vehicle, only a spare wheel with the same rolling circumference as the normal tyres should be used. The
replacement tyre must also satisfy the applicable vehicle specifications. This requirement is particularly
relevant to vehicles with a driven-wheel arrangement that depends on closely matched tyre dimensions.
Manufacturing date
The manufacturing date of a tyre can be identified from the markings moulded into its sidewall. This information
is normally included in the tyre identification code and may appear on the outer sidewall or on the inner face
of the wheel, depending on how the tyre has been manufactured and mounted. The date code indicates when the tyre
was produced, not when it was purchased, installed or first used. Checking this marking can be useful when
assessing the age of tyres already fitted to a vehicle or examining replacement tyres before installation.
DOT... 2220...
In this example, the four-digit date code 2220 indicates that the tyre was manufactured during
the 22nd week of 2020. The first two digits identify the production week, while the final two digits indicate
the year of manufacture. This allows the tyre's manufacturing period to be established directly from its
sidewall marking. If the date code is not visible on the outward-facing side of the tyre, it may be located on
the opposite sidewall.
The manufacturing date is one of several factors to consider when evaluating tyre condition. Rubber components
can deteriorate with age, and their condition is also influenced by storage, exposure to environmental
conditions and previous use. A tyre that has been driven only a short distance may still require careful
inspection if it is old or has been stored improperly. Conversely, the manufacturing date alone does not
establish whether a tyre is safe for continued use. Its tread condition, structural integrity, wear pattern and
operating history must also be taken into account. If there is any uncertainty about the suitability of an older
tyre, have it examined by a qualified tyre specialist before using it on your Seat Ibiza.
WARNING Incorrect wheel and tyre combinations can seriously affect vehicle safety. Wheels,
tyres and fastening components must be suitable for the vehicle and installed in accordance with the
manufacturer's specifications. Failure to observe these requirements may result in damage to the vehicle,
reduced driving stability or an accident.
- Only use combinations of tyres and wheel rims that have been approved by SEAT for the vehicle, together
with wheel bolts or nuts that are suitable for the particular rims. The fastening components must match
the wheel design and the vehicle's mounting requirements. Incorrect wheel dimensions or unsuitable
fasteners may prevent the wheels from being secured properly or may cause interference with other
vehicle components. Such conditions can lead to serious mechanical damage, loss of vehicle control or an
accident. Before fitting replacement wheels, verify that the complete combination is compatible with the
Seat Ibiza and complies with the applicable approval requirements.
- For technical reasons, wheels taken from other vehicles must not be assumed to be suitable for your Seat
Ibiza. Even when wheels appear identical or have similar dimensions, important installation
characteristics may differ. In some cases, wheels from another vehicle of the same model may also be
unsuitable because of differences in equipment, technical specifications or vehicle configuration.
Compatibility must therefore be established using the approved wheel specifications rather than
appearance or model designation alone. Never install wheels of uncertain suitability without obtaining
confirmation from a qualified specialist.
- Always make sure that replacement tyres provide sufficient clearance from the wheel arches, suspension
components, braking system and other surrounding parts throughout normal vehicle operation. When
selecting new tyres, do not rely exclusively on the nominal tyre size printed on the sidewall. Although
tyres from different manufacturers may carry the same size designation, their actual external dimensions
and shape can vary considerably. Differences in tread width, shoulder profile and overall construction
may affect the space available around the tyre. Insufficient clearance can cause the tyre to rub against
vehicle components during steering, suspension movement or driving under load, potentially damaging the
tyre and creating a serious safety hazard. Have the suitability and clearance of the proposed tyre and
wheel combination checked before installation.
Insufficient clearance between the tyres and surrounding vehicle components can cause serious damage during
driving. If a tyre comes into contact with the wheel arch, suspension, bodywork or another component,
friction may damage the tyre's sidewall or tread and compromise its structural integrity. Such contact can
occur during steering, suspension movement or when the vehicle is carrying a load, even if the tyre appears
to fit correctly while the vehicle is stationary. Damage caused by inadequate clearance may result in sudden
tyre failure, reduced vehicle stability or loss of control. Always ensure that the selected wheel and tyre
combination provides the clearance required for safe operation. Failure to do so creates a serious accident
hazard!
Tyres that are more than six years old should only be used in exceptional circumstances or an emergency, and
driving must be undertaken with particular caution. As tyres age, their rubber compounds and internal
materials can deteriorate, even when the tread appears to be in acceptable condition and the tyres have
covered relatively little distance. Age-related deterioration may reduce grip and increase the risk of
damage or failure. If an older tyre must be used temporarily, avoid high speeds, sudden manoeuvres and
unnecessary journeys. Have its condition assessed by a qualified tyre specialist and arrange for a suitable
replacement as soon as possible.
Do not install tyres with run-flat properties on your Seat Ibiza. The use of run-flat tyres is not permitted
for the vehicle configuration described in this manual. These tyres have specific construction and operating
characteristics that may not be compatible with the vehicle's approved wheel and tyre arrangements. Fitting
them without the necessary vehicle approval can adversely affect handling and may damage vehicle components.
Their use could also increase the risk of an accident. Always select conventional tyres that comply with the
specifications approved by SEAT for your vehicle.
If decorative wheel covers or hubcaps are fitted after the vehicle has been manufactured, make sure their
design allows sufficient airflow to reach the braking system. The brakes generate considerable heat during
operation, particularly when braking repeatedly or driving in demanding conditions. Wheel covers that
excessively restrict ventilation may interfere with the normal cooling of brake components and contribute to
overheating. This can adversely affect braking performance and increase the risk of an accident. Before
installing aftermarket wheel trims, confirm that they are suitable for the wheel design and do not obstruct
the ventilation required by the braking system.
Seat Ibiza models equipped with aerodynamic wheel rims or wheels incorporating bolted-on plastic elements may
be more susceptible to snow and ice collecting on the inner surfaces of the wheels. These wheel designs
often have a more enclosed appearance, which can make it easier for snow, slush and moisture to remain
trapped in areas that are difficult to see or reach. When temperatures are low, accumulated moisture can
freeze, leaving uneven deposits of ice inside the wheel assembly. The possibility of such accumulation
should be considered when driving in winter conditions, especially after travelling through deep snow, slush
or areas where snow has built up around the wheels.
Snow or ice trapped inside a wheel can disturb its balance and cause noticeable vibrations while the
vehicle is moving. These vibrations may become particularly apparent at speeds above approximately 40
km/h (25 mph), although their severity depends on the amount and distribution of the accumulated
material. If vibration begins after driving through snow or icy conditions, inspect the wheels for
deposits before assuming that a tyre or suspension component is defective. Remove accumulated snow and
ice from the inner wheel surfaces where this can be done safely. Warm water may be used to help loosen
frozen deposits, taking care to avoid burns, excessive heat and damage to wheel components. Make sure
that loosened material is removed and that the wheels are free to rotate normally before continuing the
journey. If the vibration remains after the wheels have been cleaned, have the vehicle inspected by a
qualified specialist workshop.
When driving on unpaved roads, dirt tracks or gravel surfaces, small stones may become lodged in wheel rims
that incorporate decorative or aerodynamic plastic inserts. The likelihood of this occurring can increase
during higher-speed driving or when the vehicle is driven aggressively over loose surfaces, as stones may be
thrown against the wheels and become trapped in narrow spaces. On aluminium wheel rims fitted with plastic
elements, debris can sometimes accumulate between the metal rim and the insert, where it may be difficult to
remove by hand. If you discover stones caught in these areas, attempt to remove them carefully using
pressurised water, provided this can be done without damaging the wheel finish, plastic components or their
attachments. Avoid forcing tools into narrow gaps or applying excessive pressure directly to vulnerable
components. If the stones cannot be removed safely, consult a specialist workshop. Leaving trapped debris in
place may cause unwanted noise, vibration or damage to the surrounding wheel components.
For the sake of the environment
Used tyres must be collected and disposed of in accordance with the environmental regulations and waste
management requirements applicable in the country concerned. Tyres should not be discarded with ordinary
household waste, abandoned in the countryside or disposed of through uncontrolled burning. Their rubber,
reinforcing materials and other components require appropriate handling and processing. When replacing tyres
on your Seat Ibiza, arrange for the removed tyres to be transferred to an authorised collection point, tyre
retailer or recycling facility. Proper disposal allows suitable materials to be recovered or processed
responsibly while reducing the environmental impact associated with waste tyres.
Note
- Before fitting wheels or tyres with dimensions different from those originally supplied by SEAT, consult
an authorised SEAT Service Centre. The service centre can provide information about the alternative
wheel and tyre sizes approved for your particular Seat Ibiza configuration and explain which
combinations are permitted. This includes checking whether different wheel or tyre specifications may be
used on the front axle (axle 1) and rear axle (axle 2), where such arrangements are authorised.
Compatibility depends on the vehicle's technical specifications and applicable approval requirements, so
the suitability of a combination should not be determined solely by comparing tyre markings or wheel
dimensions. Obtain confirmation of the permitted arrangement before purchasing or installing alternative
wheels or tyres.
- Never fit previously used tyres if their service history cannot be established with reasonable
certainty. A second-hand tyre may have been subjected to severe impacts, prolonged underinflation,
excessive loads, improper storage or repairs that are not immediately visible during an external
inspection. Even when the tread depth appears sufficient, concealed structural damage or deterioration
may make the tyre unsafe. If the previous operating conditions, age or maintenance history are unknown,
do not assume that the tyre is suitable for use on your Seat Ibiza. Choose tyres whose condition and
suitability can be reliably verified.
The condition of the wheels and tyres has a direct influence on the handling, braking performance and driving
safety of your Seat Ibiza. Tyres are the only parts of the vehicle that remain in direct ...
Fig. 178 Location of the tyre pressure sticker.
Maintaining the correct tyre inflation pressure and adopting a smooth, controlled driving style are two of the
most effective ways to exten ...
See also:
Honda Civic Owners Manual. Auto Pairing Connection
When you connect an Android phone to the unit via the front USB, Android Auto
is
automatically initiated.
Enabling Android Auto
Enable Once: Allows only once. (Prompt
shows again next time.)
Always Enable: Allows anytime. (Prompt
does not show again.)
Cancel: Does not allow this consent ...