Honda Civic manuals

Seat Ibiza (6F) 2017-2026 Owner's Manual: Introduction

Maintenance and repair work on the engine cooling system of your Seat Ibiza should only be undertaken if you understand the procedures involved, are familiar with the applicable safety precautions, and have access to the correct tools, equipment and operating fluids. The cooling system contains components that may remain extremely hot and under pressure after the engine has been switched off. Working on these components without the necessary knowledge or preparation can expose you to hot coolant, steam and other hazards.

Incorrect servicing procedures, unsuitable replacement fluids or improper handling of cooling system components can result in serious personal injury and damage to the vehicle. If you are uncertain about any part of the procedure, have the work carried out by a qualified specialist workshop rather than attempting it yourself. SEAT recommends visiting an authorised SEAT dealership, where technicians can identify the correct coolant specification and perform the required maintenance using appropriate equipment and established service procedures.

WARNING Engine coolant is a toxic substance and must be handled with extreme care. Direct exposure can be harmful, while swallowing coolant may cause severe poisoning, permanent injury or death. Never treat engine coolant as an ordinary household liquid, and take precautions to prevent accidental contact, ingestion or contamination of food and drinking water.

For the sake of the environment

Engine coolant and its chemical additives can contaminate soil, groundwater and other parts of the environment if released or disposed of incorrectly. Prevent spills when checking, topping up or replacing coolant in your Seat Ibiza, and never allow the liquid to enter drains, waterways or the surrounding ground. If coolant leaks or is accidentally spilled, collect it using a suitable container or appropriate absorbent material. Dispose of recovered coolant and contaminated materials through an authorised waste collection facility in accordance with local environmental regulations. Used coolant must never be poured onto the ground or mixed with ordinary household waste.

Coolant specifications

The engine cooling system of the Seat Ibiza is filled at the factory with a carefully formulated mixture consisting of specially treated water and a minimum of 40% G12evo coolant additive, meeting specification TL-VW 774 L. This coolant mixture is designed to provide the necessary protection against freezing, corrosion and deposits while maintaining effective heat transfer throughout the cooling system. Using the specified coolant formulation is important for the long-term reliability of the engine and its associated cooling components.

Before adding or replacing engine coolant, obtain confirmation from a qualified specialist workshop that the product you intend to use is suitable for your particular vehicle. Coolant specifications and approved products may vary, and compatibility should be established using the manufacturer's requirements rather than relying solely on the coolant's colour or general description.

SEAT recommends consulting an authorised SEAT dealership when selecting coolant or arranging cooling system maintenance. A dealership can provide guidance on the appropriate coolant specification for your Seat Ibiza and help ensure that the correct mixture is used during servicing or replacement.

To maintain adequate protection of the engine cooling system, the coolant additive must account for at least 40% of the total mixture. This minimum concentration is necessary not only for frost protection but also for the corrosion resistance and other protective properties provided by the additive. In regions where particularly low ambient temperatures are expected, the proportion of coolant additive may be increased to provide additional antifreeze protection. However, the additive concentration must never exceed 55%. Increasing the concentration beyond this limit does not improve protection; instead, it reduces the coolant's resistance to freezing and impairs its ability to transfer heat effectively. Maintaining the correct balance between water and additive is therefore essential for reliable cooling system operation.

G12evo coolant, which complies with specification TL-VW 774 L, is identifiable by its characteristic lilac colour. When mixed with distilled water, the resulting coolant generally has a pink appearance. At the specified minimum concentration, the mixture provides antifreeze protection down to approximately -25°C (-13°F). In addition to protecting the cooling system against freezing, G12evo helps prevent corrosion of light-alloy components, reduces the formation of limescale and other deposits, and raises the boiling point of the coolant. These properties contribute to effective temperature regulation and help protect the engine and cooling system components under normal operating conditions.

When topping up the cooling system, use a mixture of distilled water and at least 40% of the appropriate, approved coolant additive. Distilled water helps minimise the introduction of mineral deposits, while the specified additive concentration provides the required corrosion and antifreeze protection. Prepare the mixture in the correct proportions before adding it to the expansion tank, and ensure that the coolant is compatible with the fluid already present in the system. Do not substitute an unapproved coolant or assume that products of a similar colour have the same chemical composition or protective properties.

WARNING Insufficient antifreeze protection in the engine cooling system can allow the coolant to freeze when the vehicle is exposed to low temperatures. Frozen coolant may prevent proper circulation, damage cooling system components and cause the engine to fail. Depending on the circumstances, an engine failure or loss of vehicle heating can create dangerous situations and result in serious personal injury.

NOTICE Never mix G12evo coolant (TL-VW 774 L) with engine coolants that have not been approved by SEAT for use in the vehicle. Different coolant formulations may contain incompatible additives, and mixing them can compromise the protective properties of the cooling system fluid. An unsuitable mixture may reduce corrosion protection, encourage the formation of deposits or interfere with normal cooling system operation. Always verify compatibility before topping up the expansion tank, even when the replacement coolant appears similar in colour to the fluid already present.

For the sake of the environment

Engine coolant and the additives it contains can cause environmental pollution if they escape from the cooling system or are discarded improperly. During coolant replacement or repairs, collect all drained fluid in a suitable, leakproof container and prevent it from reaching the ground, drains or natural water sources. If a leak occurs, recover the spilled liquid promptly and arrange for the cause of the leak to be repaired. Used coolant, contaminated absorbent materials and any remaining coolant mixture must be disposed of through an appropriate authorised collection or recycling facility. Responsible handling of these substances helps prevent contamination of soil and water and reduces the environmental impact of vehicle maintenance.

Cooling system
...

Check and refill the coolant
Fig. 169 In the front compartment: marking on coolant expansion tank. Fig. 170 Front compartment: coolant expansion tank cap. Preliminary steps Before checking or replenishi ...

See also:

Honda Civic Service Manual. Right M/T Differential Oil Seal Replacement (R18Z1 M/T)
2191F5 RIGHT 1. Vehicle Lift 1. Raise the vehicle on a lift, and make sure it is securely supported. 2. Engine Undercover 1. ...

Nissan Kicks - OM - Seats - Wheels and tires - Audio system -
© 2016-2026 Copyright www.hocivic.com

0.0102