Seat Ibiza (6F) 2017-2026 Owner's Manual: Window anti-trap function
The anti-trap function, also known as the roll-back function, is designed to reduce the risk of injury when the
electric windows of the Seat Ibiza are closing. It provides an additional safety measure by detecting resistance
during the upward movement of the glass. Although this function helps protect occupants from becoming trapped,
it does not eliminate the need to check that the window opening is clear before closing it.
If an electric window encounters an obstruction or unusual resistance while closing, the anti-trap system
interrupts the closing movement and immediately lowers the glass again. This automatic reversal helps reduce the
pressure applied to an object or part of the body caught in the window opening. The function operates during
normal electric window closing and is particularly important when the one-touch closing feature is used.
- Identify the cause of the obstruction. If the window reverses direction instead of closing
completely, inspect the window opening and check what may be preventing the glass from moving freely. Look
for objects caught between the glass and the window frame, or anything else that could restrict its
movement. Do not attempt to force the window closed without first checking the cause.
- Attempt to close the window again. After checking the opening and removing any visible
obstruction, operate the corresponding window switch once more. If the glass can move without resistance,
the window should close normally. Continue to observe its movement throughout the closing operation.
- Repeated interruption temporarily changes the anti-trap operation. If the window encounters
resistance again and the closing process is interrupted a second time, the anti-trap function is temporarily
deactivated for a few seconds. This allows another closing attempt, but it also means that the normal
automatic protection may not be available during that brief interval. Exercise particular care and make sure
that nobody is near the moving glass.
- Closing after another unsuccessful attempt. If the window still cannot complete its closing
movement, it stops at the position reached. Pulling the corresponding window switch again within a few
seconds allows the window to close without the anti-trap function. Because the protective reversal function
is disabled during this operation, the closing movement must be monitored carefully to prevent injury or
damage.
Closing the windows without the anti-trap
function
Under certain circumstances, the Seat Ibiza allows a window to be closed temporarily without the anti-trap
function. This procedure is intended for situations in which repeated resistance prevents the glass from
reaching its fully closed position. Because the normal protection against trapping is not available during this
operation, it must only be carried out after confirming that the window opening is completely clear.
- Repeat the closing command within a few seconds. Pull the corresponding electric window
switch upwards and keep it held in the closing position without releasing it. The operation must be
performed within a few seconds of the previous interrupted closing attempt.
During this closing attempt, the anti-trap function is deactivated. The window can therefore continue
moving upwards without the normal automatic reversal response to resistance. Watch the glass
continuously and make certain that no fingers, hands or other objects are in its path.
- The anti-trap function becomes active again after the permitted interval. If more than a
few seconds pass before the closing procedure is completed, the anti-trap protection is reactivated. Should
the window then encounter an obstruction or excessive resistance, its closing movement will stop and the
glass will automatically lower again. This restores the normal protective response and prevents the
temporary override from remaining active indefinitely.
- Seek professional assistance if the window cannot be closed. If the electric window
continues to stop, reverse direction or refuses to close despite the prescribed procedure, contact a
specialised workshop. A persistent problem may indicate that the window mechanism requires inspection. Avoid
repeatedly forcing the glass upwards, as this could damage the window components or create a risk of injury.
WARNING Follow the safety instructions provided in the section "Opening and closing the
windows" on page 81. The Seat Ibiza window anti-trap function is an additional protective feature and must
not be relied upon as the sole means of preventing injuries. Always ensure that the window opening is
unobstructed before operating the electric window controls, particularly when closing the glass
automatically or temporarily overriding the anti-trap protection.
- The roll-back function cannot completely prevent trapping injuries. Fingers, hands and
other parts of the body may still become caught or compressed between the moving window glass and its
surrounding frame. The presence of anti-trap protection does not guarantee that every obstruction will
be detected before an injury occurs. Never place any part of the body in the path of a closing window,
and do not allow children to play with the electric window switches. There is a risk of serious injury
and accidents.
Note The anti-trap function also operates when the Seat Ibiza windows are closed using the
convenience closing feature controlled by the vehicle key. This means that the protective reversal function
is available not only when operating the switches inside the passenger compartment, but also during normal
remote convenience closing. Nevertheless, always remain close enough to observe the windows and release the
closing command immediately if there is a risk of trapping someone or something.
Fig. 57 Detail of the driver's door: window
controls.
The Seat Ibiza electric window system allows the driver and passengers to raise or lower the side windows using
the switches fitte ...
See also:
Honda Civic Owners Manual. RDM On and Off
Press the RDM button to turn the system on
and off.
The indicator in the button comes on and
the message appears on the driver
information interface when the system is
on.
RDM On and Off
When you have selected Warning Only from the
customized options using th ...