
Fig. 57 Detail of the driver's door: window
controls.
The Seat Ibiza electric window system allows the driver and passengers to raise or lower the side windows using the switches fitted to the doors. The driver's door contains the main control panel, illustrated in Fig. 57, from which all four side windows can be operated. Each switch controls its corresponding window, making it possible to adjust ventilation or close the windows without leaving the driver's seat.
downwards. The
window moves down in response to the control, allowing the opening to be adjusted as required.
upwards. The
window moves towards its closed position. Before raising the glass, make sure that nobody has their hands,
fingers or other objects in the window opening.Buttons on the driver’s door
The driver's door control panel contains individual switches for the front and rear side windows, together with a safety control for the rear window switches. The numbered controls shown in Fig. 57 have the following functions:
All front and rear electric windows can be operated from the main control panel on the driver's door. In addition, each of the other doors is equipped with a separate switch for operating its own window. This arrangement allows passengers to adjust their windows individually, while the driver retains access to all window controls. The rear door switches can be disabled using the safety control on the driver's door when necessary.
Always close the windows completely when parking the Seat Ibiza or leaving it unattended. Open or partially open windows can allow rain, dust and other external elements to enter the passenger compartment. They may also make it easier for unauthorised persons to reach into the vehicle. Before locking the car and walking away, check that every window has reached its fully closed position.
The electric windows may remain operational for approximately 10 minutes after the ignition has been switched off. This allows the occupants to make final adjustments to the windows without immediately switching the ignition back on. However, the function remains available only if neither the driver's door nor the front passenger door has been opened and, depending on the vehicle's equipment, the ignition key has not been removed. Opening either front door or removing the key where applicable can end this period of continued window operation. The precise behaviour depends on the equipment fitted to the Seat Ibiza.
Safety switch 
The rear window safety control, identified as item 5 in Fig. 57, is located on the driver's door alongside the electric window switches. Its purpose is to prevent passengers in the rear seats from operating their windows using the buttons fitted to the rear doors. This provides the driver with a convenient way to restrict rear window operation, particularly when transporting young children who might otherwise press the switches unintentionally.
Safety control not pressed: The electric window buttons on the rear doors remain active. Rear-seat passengers can use their respective door switches to open or close the windows, subject to the normal operating conditions of the electric window system.
Safety control pressed: The electric window buttons on the rear doors are deactivated. Passengers in the rear seats can no longer operate their windows using those switches. The driver can continue to control the rear windows from the main switch panel on the driver's door.
When the rear door window switches have been disabled, the safety control symbol
illuminates in yellow. This indicator
confirms that the rear window safety function is active. When the rear door switches are enabled again, the
yellow indication is no longer displayed. The illuminated symbol therefore provides a quick visual reference to
the current status of the rear window controls.
Convenience opening and closing
The Seat Ibiza convenience opening and closing function allows the electric windows to be operated from outside the vehicle using the vehicle key. This makes it possible to open the windows before entering the car or close them after getting out, without operating each individual window switch. Where the vehicle is equipped with an electrically operated sunroof, the convenience function can also control its opening and closing movement.
Depending on the equipment and available configuration, the convenience opening function can be adjusted through
the Infotainment system. Open the relevant vehicle menu using the function button
> Settings > Opening and closing > Window
operation > Convenience opening. The settings available in this menu determine how the convenience opening
function operates on the vehicle. Check the selected configuration if the windows do not respond as expected
when using the remote control key.
Convenience opening:
The convenience opening function can be used to lower the windows from outside the Seat Ibiza. Depending on the vehicle's equipment, the sunroof can also be opened using the same command. The opening movement can be controlled by holding the appropriate button on the remote control key or by maintaining the mechanical key in the unlocking position.
on the vehicle
key. Keep the button pressed while the windows and, where fitted, the sunroof move towards the desired open
position. Release the button when the required opening has been reached. This allows the windows to be
adjusted together without using the switches inside the vehicle.Convenience closing:
The convenience closing function allows the windows and, where fitted, the sunroof to be closed together from outside the Seat Ibiza. This is useful when leaving the vehicle, as the driver can close the openings without returning to the individual controls inside the passenger compartment. Always observe the windows and sunroof throughout the closing movement and make sure that no person or object is in their path.
on the remote
control key. Keep the button pressed until all the windows and the sunroof, if fitted, have reached their
fully closed positions. Do not release the button prematurely if the openings have not yet closed
completely.When the convenience closing function is activated on a Seat Ibiza equipped with a panoramic sunroof, the electric windows close first, followed by the panoramic sunroof. This sequence is carried out automatically as part of the same closing operation. Keep the closing command activated until both the windows and the sunroof have reached their fully closed positions, and make sure that nothing obstructs their movement.
One-touch opening and closing
The one-touch function allows the electric windows of the Seat Ibiza to be opened or closed completely with a single operation of the corresponding window switch. Instead of holding the button throughout the entire movement, the driver or passenger can activate automatic raising or lowering by moving the switch to its second operating position. Once activated, the window continues travelling towards its fully open or fully closed position without further pressure on the control.
To activate automatic raising, pull the switch for the required window upwards until it reaches the second position. The window then begins closing automatically and continues moving towards its upper limit without the need to keep the switch pulled. Before activating this function, check that the window opening is clear and that no person or object could become trapped by the rising glass.
To activate automatic lowering, press the corresponding window switch downwards until it reaches the second position. The window will lower automatically until it reaches its fully open position. This allows the glass to be lowered without continuously pressing the switch, making it easier to operate the electric windows during normal use.
To interrupt automatic window movement, press or pull the switch for the window that is moving. Operating the corresponding control again stops the automatic raising or lowering process, allowing the window to remain at an intermediate position. This is useful when only a partial opening is required or when the movement needs to be stopped immediately.
Resetting the automatic raising/lowering function
If the Seat Ibiza's 12-volt battery is disconnected or becomes discharged while one or more windows are not completely closed, the automatic raising and lowering function may be deactivated. In this situation, the electric windows may no longer respond to the second switch position as they normally would. The one-touch function must be reset before automatic opening and closing can operate again. The reset procedure restores the window control system's normal automatic operation.
The automatic raising and lowering function can be reset individually for a particular window or for several windows at the same time. This means that the procedure does not necessarily have to be repeated separately for every electric window if more than one requires resetting. If only one window has lost its automatic function, the reset can be carried out for that window without changing the operation of the others.
WARNING Always follow the safety precautions described in the Introduction on page 76 when operating the Seat Ibiza electric windows. Incorrect use of the window controls can result in serious injuries, particularly if a person or part of the body becomes trapped between the moving glass and the window frame. Exercise particular care when operating the windows automatically or using the convenience closing function from outside the vehicle.
Note If an electric window cannot close normally because its movement is restricted or an obstruction is present, the window automatically opens again. This behaviour may occur if the glass encounters resistance while travelling upwards. If the window reverses direction instead of closing, inspect the window opening and determine what is preventing normal movement before attempting to close it again. Remove any visible obstruction and check that the glass can move freely. Do not repeatedly attempt to force the window closed while the cause of the resistance remains unresolved.
Window controls
Window anti-trap functionHonda Civic Service Manual. How to Set Readiness Codes (KA KC KL models K24Z7)
Malfunction Indicator Lamp (MIL) Indication (In relation to Readiness Codes)
The vehicle has certain readiness codes that are part of the on-board diagnostics
for the emissions systems. If the vehicle's battery has been disconnected or gone
dead, if DTCs have been cleared, or if the ECM has ...