Seat Ibiza (6F) 2017-2026 Owner's Manual: Wheel central trim

Fig. 182 Correct positioning of the central
wheel trim for steel rims.
The central wheel trims fitted to certain steel wheels on the Seat Ibiza cover the wheel fastening nuts or bolts
and must be removed before these fasteners can be accessed. The trims are designed to fit securely into the
centre of the wheel while providing a finished appearance. Removal and refitting should be carried out carefully
to avoid damaging the trim, its retaining features or the wheel surface. Use the appropriate tool from the
vehicle's on-board tool kit rather than attempting to force the trim off with an unsuitable object.
Removing
- Take the wire extraction hook from the vehicle's tool kit and insert it into one of the recesses provided in
the central wheel trim. Make sure the hook engages securely with the trim before applying force. Pull the
hook carefully to release the trim from its mounting position, keeping the pulling force as straight and
controlled as possible. Once the trim has been released, remove it from the wheel and place it somewhere
safe. Avoid using sharp metal tools against the visible trim surface, as they may scratch or damage it.
Fitting
- Position the central wheel trim against the steel wheel rim, making sure it is correctly oriented before
pressing it into place. The lower part of the letter "S" in the SEAT badge must align with
the tyre inflation valve, identified as position 1 in Fig. 182. This alignment ensures that
the trim is installed in its intended orientation. Check the position of the badge and valve carefully, as
incorrect alignment may prevent the trim from seating properly.
- Once the trim is correctly aligned, press it firmly and evenly into the centre of the wheel until it engages
with an audible click. The click indicates that the retaining mechanism has locked into position. Check that
the trim sits flush and is securely attached around its circumference. It should not feel loose or move when
gently checked by hand. A trim that has not engaged properly may become detached while the vehicle is
moving.
Note
The rear surface of the central wheel trim also has a marking that identifies the correct position of the
tyre inflation valve. This marking can be used as an additional reference when reinstalling the trim,
particularly if the alignment of the SEAT badge is difficult to judge from the front. Match the valve
marking with the actual valve position before pressing the trim into place. Correct orientation helps ensure
that the trim fits securely and does not interfere with access to the inflation valve.
Integral wheel trim

Fig. 183 Remove the wheel cover.
Full-size wheel covers, also referred to as integral wheel trims, conceal the wheel fastening nuts or bolts and
must be removed before a wheel can be changed. These covers are secured around the wheel rim and require a
suitable removal technique to prevent damage to their retaining clips or decorative surfaces. Use the tools
supplied with the Seat Ibiza and follow the procedure shown in Fig. 183. Do not attempt to prise the cover away
using sharp or unsuitable tools, as this may damage the wheel cover or the rim.
Removing
- Take the wheel wrench and the wire extraction hook from the vehicle's on-board tool kit. Check that both
tools are available and in suitable condition before beginning. The wire hook is used to engage the wheel
cover, while the wheel wrench provides a means of applying controlled pulling force. Using the correct tools
helps reduce the likelihood of damaging the trim during removal.
- Insert the wire hook through one of the grooves or openings provided in the wheel cover. Make sure the hook
is securely engaged with the trim so that it cannot slip out unexpectedly when force is applied. Choose a
suitable opening that allows the cover to be pulled away from the rim without placing unnecessary stress on
its decorative surface.
- Pass the wheel wrench through the wire hook as illustrated in Fig. 183. Position the wrench so that it can
be used to pull the wheel cover away from the rim, using the tyre as the support point shown in the
illustration. Apply steady, controlled force until the cover releases from its retaining clips. Avoid sudden
jerking movements that could damage the cover or cause the tools to slip. Once the wheel cover has been
released, remove it completely and store it safely until the wheel-changing operation is finished.
Fitting
- Before reinstalling the integral wheel trim, locate the opening provided for the tyre inflation valve.
Position the cover against the wheel so that this opening aligns precisely with the valve. Press the trim
towards the rim, making sure the valve passes through the designated opening without being bent or placed
under pressure. Incorrect alignment can interfere with proper seating of the cover and may make it difficult
to access the valve when checking tyre pressure.
- Press the wheel trim into place progressively around its circumference, ensuring that all retaining points
engage securely with the wheel rim. Check that the cover sits evenly and does not project outward or remain
loose at any point. If the wheel is equipped with an anti-theft wheel fastener, install it in the position
opposite the tyre inflation valve as specified. Once the trim has been fitted, check its attachment by
gently pressing around the edges. The cover must remain firmly seated so that it cannot become detached
during normal driving.
Fig. 181 In the luggage compartment: remove
the subwoofer.
The temporary spare wheel in the Seat Ibiza is located beneath the floor panel of the luggage compartment. It is
held securel ...
Fig. 184 Wheel: wheel nuts fitted with protective caps.
The wheel nuts on the Seat Ibiza are fitted with protective caps that help shield them from dirt, moisture and
other contaminants ...
See also:
Honda Civic Owners Manual. Interior Checks
Store or secure all items on board properly.
Carrying too much cargo, or improperly storing it, can affect your
vehicle's
handling, stability, stopping distance, and tires, and make it unsafe.
Do not pile items higher than the seat height.
They can block your vi ...