Seat Ibiza (6F) 2017-2026 Owner's Manual: Variable luggage compartment floor

Fig. 138 Variable luggage compartment floor: A raised position; B lowered position.

Fig. 139 Variable boot floor: tilted position.
The variable luggage compartment floor allows the loading area of the Seat Ibiza to be arranged in different
positions according to the items being transported. It can be set in a raised position, lowered to provide
additional vertical space or tilted to allow access to the compartment beneath it. The floor is moved using its
integrated handle and the supporting fittings provided in the luggage compartment. When changing its position,
follow the specified sequence so that the panel engages correctly and does not damage the surrounding trim.
Variable floor in high position
- To move the variable floor from its lower position to the raised position, grasp the handle marked
1 in Fig. 138 and lift the floor. Pull the panel rearwards until its front edge has moved
completely past the supports identified by 2. Make sure the front of the floor is clear of
these supports before attempting to reposition it at the higher level.
- With the floor raised above the supporting fittings, move it forwards over the supports towards the rear
seat backrest. Continue until it reaches the intended position, then use handle 1 to lower
the panel carefully onto the upper supports. Check that the floor is seated correctly and rests securely in
its raised position before placing luggage on it.
Variable floor in low position
- To change the variable floor from its raised position to the lower position, lift the panel using handle
1 shown in Fig. 138. Pull the floor rearwards until its front edge has completely cleared
the supports marked 2. This movement releases the panel from the upper supporting position
and allows it to be lowered.
- Carefully lower the front section of the panel towards the bottom of the luggage compartment. At the same
time, slide the floor forwards until it reaches the rear seat backrest, gradually lowering the rear section
with handle 1. Guide the movement throughout the procedure so that the panel settles evenly
into its lower position without dropping against the luggage compartment lining.
Variable floor in the tilted position
Tilting the variable luggage compartment floor provides access to the space underneath the loading surface.
Depending on the vehicle's equipment, this area contains the spare wheel or the tyre puncture repair kit. The
tilted position allows these items to be reached without completely removing the floor panel from the Seat Ibiza
luggage compartment.
- With the variable floor in its raised position, take hold of handle 1 in Fig. 138 and lift
the panel upwards. Pull it up and push it towards the rear seat backrest until the floor folds along its
hinge line. Continue the movement until the movable section folds back and rests against the other part of
the floor, as intended by the folding arrangement.
- Position the folded floor on the designated supporting recesses indicated by the arrows in Fig. 139. Make
sure the panel rests correctly on these supports before accessing the compartment beneath it. The floor
should remain properly supported while the spare wheel or puncture repair equipment is being accessed.
WARNING
Objects carried in the luggage compartment must remain securely restrained, including when the variable
floor is raised. The raised floor does not replace suitable load-securing equipment, and items placed
beneath or around it must comply with the specified size and weight restrictions. Incorrectly positioned or
unsecured cargo can move during braking or sudden manoeuvres and may cause injuries or affect vehicle
handling.
- Always secure objects transported in the luggage compartment, even when the variable floor is correctly
raised and supported. Do not rely on the floor panel alone to prevent luggage from moving during sudden
braking, cornering or an accident.
- When carrying objects in the space between the rear seat and the raised luggage compartment floor, ensure
that their height does not exceed two-thirds of the available floor height. Objects
that protrude beyond this limit must not be transported in that space, as they may interfere with the
proper position and safe use of the raised floor.
- Only transport objects weighing no more than approximately 7.5 kg in the space between
the rear seat and the raised luggage compartment floor. Do not exceed this limit or use the compartment
for heavier items, even if they appear to fit within the available space.
NOTICE
- When the variable luggage compartment floor is installed in its upper position, the maximum permitted
load on the floor is 100 kg. Do not exceed this weight limit. The floor and its
supporting fittings are designed for the specified load, and excessive weight may damage the panel or
its supports. The vehicle's overall loading limits must also be respected.
- Never allow the variable luggage compartment floor to fall freely when lowering or closing it. Hold the
panel by its handle and guide it down slowly in a controlled movement until it reaches the intended
position. Dropping the floor can damage the luggage compartment lining, the floor panel itself or the
surrounding supporting components.
Fig. 136 In the luggage compartment: removing and installing the shelf.
Fig. 137 In the luggage compartment: removing and installing the shelf.
The luggage compartment shelf sepa ...
Fastening rings
Fig. 140 Location of fastening rings in the luggage compartment
The Seat Ibiza luggage compartment is equipped with fastening rings positioned towards the front and r ...
See also:
Honda Civic Owners Manual. Checking the Engine
If the engine does not start, check the starter.
Checking the Engine
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
Starter condition
Checklist
Starter doesn't turn or turns
over slowly.
The batte ...