Seat Ibiza (6F) 2017-2026 Owner's Manual: TMS (Tyre Mobility System) puncture
repair kit
The Tyre Mobility System (TMS) supplied with the Seat Ibiza is designed to provide a temporary solution for
certain tyre punctures without requiring an immediate wheel change. The repair kit can effectively seal small
punctures caused by foreign objects with a diameter of approximately 4 mm or less, provided the tyre has not
suffered additional damage that would make a temporary repair unsafe. Typical examples include punctures caused
by nails or screws penetrating the tread. If the object responsible for the puncture is still embedded in the
tyre, do not attempt to pull it out. Removing a nail, screw or similar object may enlarge the opening or cause
additional air loss, making the sealing procedure less effective.
The system works by introducing a specially formulated sealant into the damaged tyre and restoring its inflation
pressure using the supplied compressor. The sealant is intended to close the puncture sufficiently to allow the
vehicle to be driven a limited distance to a suitable repair facility. It does not restore the tyre to its
original condition or provide a permanent repair. The effectiveness of the treatment depends on the size and
location of the puncture, the condition of the tyre and whether the instructions for using the repair kit are
followed correctly.
After introducing the sealant into the tyre and inflating it, the Seat Ibiza must be driven for a short period to
distribute the sealing compound inside the tyre. Check the inflation pressure again after approximately 10
minutes of driving. This inspection is essential because the tyre may continue to lose air if the puncture has
not been sealed successfully. Do not assume that the repair has worked simply because the tyre initially reaches
the required pressure. If the pressure cannot be maintained or the tyre shows signs of further damage, stop
driving and obtain professional assistance.
Only use the Tyre Mobility System when the vehicle is parked in a secure location, away from moving traffic, and
the surrounding conditions allow the procedure to be carried out safely. You should be familiar with the
instructions, have the complete repair kit available and understand the limitations of the sealant and
compressor. If you are uncertain about the procedure, cannot identify the extent of the tyre damage or cannot
work safely at the roadside, contact a professional roadside assistance service instead of attempting the repair
yourself.
Tyre sealant must not be used in the following
cases:
- If the wheel rim is damaged. A bent, cracked or otherwise damaged rim may prevent the tyre from sealing
correctly against the wheel or may compromise the safety of the entire wheel assembly. Tyre sealant cannot
repair damage to the rim itself. If the wheel has been affected by a strong impact or shows visible
deformation, do not attempt to make it roadworthy using the puncture repair kit. Arrange for the wheel and
tyre to be inspected by a qualified specialist.
- If the outside temperature is below -20°C (-4°F). The tyre sealant is not intended to be
used below this temperature limit, as extremely cold conditions may prevent it from functioning as required.
Do not rely on the repair kit to seal a puncture when the ambient temperature is outside its specified
operating range. Seek professional assistance or use another approved solution where available.
- If a cut, hole or puncture in the tyre is larger than approximately 4 mm. The Tyre Mobility
System is intended for relatively small punctures and cannot reliably seal extensive damage. Larger
openings, significant cuts or tears may allow air to escape too rapidly for the sealant to work effectively.
Attempting to continue driving with such damage can lead to sudden tyre failure. A tyre with damage beyond
the permitted repair limit must be assessed by a qualified specialist.
- If the vehicle has been driven with very low tyre pressure or with the tyre completely deflated. Continuing
to drive on an underinflated or flat tyre can damage its internal structure, sidewalls and other components,
even when the damage is not immediately visible from the outside. Introducing sealant does not reverse this
deterioration. If the Seat Ibiza has been driven under these conditions, do not use the repair kit as a
substitute for a professional inspection and suitable tyre replacement.
- If the expiry date printed on the sealant bottle has passed. The sealing compound has a limited service
life, and its effectiveness cannot be relied upon after the specified expiry date. Check the date
periodically, particularly before long journeys, and replace an expired bottle before the repair kit is
needed in an emergency. An expired sealant bottle should not be used simply because it remains unopened or
appears to be in good condition.
WARNING
Using the Tyre Mobility System can expose you to serious hazards, particularly when a puncture occurs beside
a busy road. The repair procedure requires the driver to work close to the vehicle's wheels, often under
conditions involving passing traffic, poor visibility or an unsuitable road surface. A vehicle that is not
properly secured may move unexpectedly, while an unsafe working location can place both the driver and
passengers at risk. To reduce the possibility of serious injury, observe the following precautions before
attempting to repair a tyre.
- Stop the Seat Ibiza as soon as it is safe to do so and select a location where the vehicle can remain
stationary without creating an unnecessary hazard. Park as far away from moving traffic as reasonably
possible, preferably in a designated stopping area or another secure location. Do not attempt to repair
the tyre in a traffic lane or anywhere that exposes you to approaching vehicles. If a safe working
position cannot be found, contact roadside assistance.
- Make sure the vehicle is standing on firm, level ground before beginning the repair. An uneven or
unstable surface can make it difficult to work safely and may increase the risk of the vehicle moving.
Avoid soft ground, steep slopes and locations where the vehicle cannot be secured reliably. The
surrounding area should also provide sufficient space to access the damaged tyre and operate the
compressor without standing in the path of traffic.
- All passengers must remain clear of the repair area throughout the procedure. Ask everyone to leave the
vehicle when it is safe to do so and move to a protected location away from passing traffic. Children
require particular supervision and must not be allowed to approach the wheel, compressor, sealant bottle
or other equipment. Where a roadside safety barrier is available, passengers should wait behind it
rather than beside the vehicle.
- Switch on the hazard warning lights to alert approaching road users that the vehicle is stationary
because of a problem. The flashing lights help make the Seat Ibiza more visible, especially in poor
weather, darkness or reduced visibility. Follow any additional national requirements concerning
reflective clothing, warning triangles or approved emergency warning beacons. Hazard warning lights do
not make an unsafe roadside location suitable for carrying out a tyre repair.
- Before preparing the repair kit, stop the engine, apply the parking brake firmly and secure the
transmission. On vehicles with a manual gearbox, engage a gear. On vehicles with an automatic
transmission, select the parking position P. These precautions reduce the likelihood of
the vehicle moving unexpectedly while you are working beside a wheel. Keep the vehicle secured
throughout the repair procedure, and follow the equipment manufacturer's instructions if the compressor
requires electrical power.
- Use the puncture repair kit only if you understand the necessary operations and can follow the supplied
instructions correctly. Incorrect handling of the sealant bottle, valve components or compressor may
prevent the puncture from being sealed and could expose you to unnecessary hazards. If you are
unfamiliar with the equipment, discover that parts are missing or cannot complete the procedure safely,
obtain professional assistance rather than improvising a repair.
- The Tyre Mobility System is intended exclusively for emergency use. Its purpose is to allow the vehicle
to reach the nearest suitable garage or tyre repair facility after a minor puncture. A tyre treated with
sealant must not be regarded as permanently repaired, even if it appears to hold pressure and the
vehicle can be driven normally. Continue only as far as necessary to obtain professional attention,
while observing the specified speed and operating restrictions.
- Arrange for a tyre treated with the puncture repair kit to be replaced as soon as possible. The sealant
provides a temporary measure and does not restore the tyre's original construction or operating
characteristics. Inform the tyre specialist that sealant has been introduced into the tyre so that the
wheel can be handled and inspected appropriately. Do not postpone professional attention merely because
the temporary repair appears to be successful.
WARNING
A tyre that has been filled with puncture repair sealant does not provide the same driving characteristics
as an undamaged conventional tyre. The temporary repair may affect how the tyre responds during
acceleration, braking and cornering, and its ability to retain pressure must not be taken for granted. The
vehicle must therefore be driven with particular caution until the damaged tyre has been replaced. Failure
to observe the restrictions associated with the repair kit can increase the risk of tyre failure, loss of
control and a serious accident.
- Never exceed 80 km/h (50 mph) when driving the Seat Ibiza with a tyre that has been
temporarily repaired using the Tyre Mobility System. This maximum speed applies even if the tyre appears
to be correctly inflated and the vehicle seems to handle normally. Reduce speed further whenever road
conditions, visibility or traffic make it necessary. The repaired tyre is intended only for restricted
emergency operation and must not be subjected to the demands of high-speed driving.
- Avoid accelerating at full throttle, braking heavily or taking corners at high speed. Sudden changes in
speed or direction place additional forces on the damaged tyre and may compromise the temporary seal.
Accelerate progressively, brake smoothly and approach bends at a moderate speed. Maintain a generous
distance from other vehicles so that sudden braking is less likely to be required. These precautions are
particularly important on wet, slippery or uneven roads.
- After applying the sealant and inflating the tyre, drive for approximately 10 minutes at
a speed not exceeding 80 km/h (50 mph), then stop safely and check the tyre inflation
pressure again. This short journey allows the sealant to spread inside the tyre and reach the puncture.
The subsequent pressure check helps determine whether the temporary repair has been effective. If the
tyre has lost excessive pressure or cannot maintain the required inflation level, do not continue
driving. Seek professional assistance instead.
CAUTION
- The tyre sealant contains substances that may be harmful to health and should be handled carefully. Avoid
unnecessary contact with the skin, eyes or clothing while connecting the bottle and introducing the
compound into the tyre. If sealant comes into contact with the skin, remove it and clean the affected
area immediately. Follow the safety information provided with the sealant bottle and the repair kit. Do
not handle the compound as though it were an ordinary cleaning or maintenance product.
- Always store the puncture repair kit where children cannot reach it. The sealant bottle, valve components
and compressor are intended for use by someone familiar with the repair procedure and must not be
treated as toys. Keep the equipment secured in its designated storage compartment when it is not in use,
and do not allow children to handle the sealant or operate the compressor during a roadside repair.
For the sake of the environment
Used, damaged or expired tyre sealant must be disposed of in accordance with the applicable waste disposal
and environmental regulations. Do not pour the sealing compound into drains, onto the ground or into
ordinary waste containers unless local rules specifically permit that method of disposal. The contents and
packaging should be handled through an appropriate collection or disposal facility. When replacing the
sealant bottle in your Seat Ibiza repair kit, follow the relevant local requirements for dealing with the
old container and any remaining compound.
Note
Replacement bottles of tyre sealant can be purchased from authorised SEAT dealers. If the original
bottle has been used, has expired or is no longer in suitable condition, obtain a compatible replacement
intended for the Tyre Mobility System fitted to your vehicle. Check that the new bottle is suitable for the
supplied repair equipment and store it correctly so that the kit remains ready for emergency use.
Note
The Tyre Mobility System is supplied with separate operating instructions from the equipment manufacturer.
Read and follow these instructions before using the kit, as the precise connection, inflation and sealing
procedures may depend on the version of the equipment supplied with the Seat Ibiza. The manufacturer's
instructions also provide information about the safe handling of the sealant and compressor. If there is any
uncertainty about operating the equipment, seek professional assistance.
Fig. 191 Standard display: contents of the tyre
mobility system.
The Tyre Mobility System supplied with the Seat Ibiza is stored beneath the floor covering in the luggage
compartment. ...
See also:
Seat Ibiza (6F) 2017-2026 Owner's Manual. Front seats
Introduction
WARNING Before adjusting or using the front seats of the Seat Ibiza, carefully read and
follow the instructions and safety precautions in the chapter "Correct sitting position of vehicle
occupants." The position of the seats, backrests and headrests is important for both drivin ...