Indications about the technical data
Vehicle identification data
The technical specifications provided for the Seat Ibiza describe the characteristics of the relevant vehicle versions and equipment configurations. Individual values may differ depending on the engine, transmission, optional equipment and model variant. Specifications can also vary for vehicles manufactured for particular national markets or fitted with special equipment.
For this reason, the figures shown in the technical data section should be interpreted in relation to the exact version of your vehicle. A specification listed for one configuration may not apply to another Seat Ibiza with different equipment, even when both vehicles belong to the same model range.
The information contained in the official vehicle documentation always takes precedence. If a value in the general technical specifications differs from the information recorded in your vehicle's registration documents, certificate of conformity or other official documentation, the vehicle-specific documents must be used as the authoritative reference.
Abbreviations used in the Technical Specifications section
The technical specifications contain abbreviations and measurement units used to describe engine performance, vehicle dimensions, weight limits and other characteristics. The following reference table explains the abbreviations used in this section and helps identify the meaning of the figures provided for the Seat Ibiza.
Vehicle Identification Number (VIN)
The Vehicle Identification Number (VIN) is the unique identification number assigned to your Seat Ibiza. It is used to identify the individual vehicle in official documentation and may be required when arranging servicing, ordering replacement parts or completing registration and insurance procedures.
The VIN can be found in several locations on the vehicle and, depending on the installed infotainment system, may also be displayed electronically. Check the following locations when you need to identify the vehicle:
When checking the VIN, ensure that the number corresponds to the identification details in the vehicle's official documentation. This is particularly important when ordering parts or requesting technical information specific to the vehicle.
Type plate
The manufacturer's type plate is located on the right-hand door frame of the vehicle. It provides identification and approval information relevant to the particular Seat Ibiza. The plate should remain legible and must not be removed or altered.
Vehicles manufactured for certain export markets may not have a type plate in this location. The presence and format of the plate depend on the identification and regulatory requirements applicable in the country for which the vehicle was produced.
Performance
The performance figures stated in the technical specifications represent values determined under favourable operating conditions. They apply to optimal road and weather conditions and should not be interpreted as performance that can be reproduced in every driving situation.
Actual vehicle performance can be influenced by road surface conditions, gradients, ambient temperature, wind, vehicle loading and other external factors. Differences in these conditions may affect acceleration, maximum speed and the way the vehicle responds during driving.
The published performance values have been calculated without additional equipment that could affect the results. Accessories or other equipment installed after manufacture may change the vehicle's weight or aerodynamic characteristics and consequently influence its performance.
Fuel consumption
The officially approved fuel consumption figures are established through measurements carried out or supervised by certified laboratories within the European Union. These measurements follow the testing procedures and legal requirements applicable at the time of approval and are based on the characteristics of the vehicle version being assessed.
The purpose of these standardised measurements is to provide comparable fuel consumption and emissions information for different vehicles and configurations. Because the testing conditions are defined by legislation, the resulting figures may differ from the consumption experienced during everyday driving.
Further information about the relevant European legislation and approval requirements can be obtained from the Publications Office of the European Union through the EUR-Lex website:
The officially approved fuel consumption and CO2 emissions values for your Seat Ibiza are provided in the documentation supplied to the purchaser when the vehicle is sold. These figures relate to the relevant vehicle configuration and should be consulted when precise approved values are required.
Actual fuel consumption and CO2 emissions depend on several factors. The equipment installed in an individual vehicle can affect its weight and operating characteristics, while the driver's behaviour and the conditions encountered during a journey also have a significant influence.
In particular, fuel consumption may vary according to driving style, acceleration and braking habits, road conditions, traffic density, weather and ambient temperature. The weight of luggage, the number of passengers and the overall vehicle load can also affect the amount of fuel required. Consequently, the consumption recorded during normal use may be higher or lower than the officially approved value.
Tank level
The following technical data table provides information concerning the fuel tank capacity specified for the relevant Seat Ibiza version. Consult the values applicable to your vehicle's engine and equipment configuration when checking the manufacturer's fuel tank specifications.

Weights
The kerb weight values specified for the Seat Ibiza refer to a vehicle prepared for normal driving. These figures include a driver weighing 75 kg, the necessary operating fluids and, where applicable, the tools and spare wheel supplied with the vehicle.
The actual kerb weight may increase when optional equipment is fitted or additional accessories are installed after manufacture. Equipment such as extra vehicle accessories contributes to the total weight and therefore reduces the remaining payload available for passengers, luggage and other items.
When calculating how much weight can be carried, take account of the vehicle's actual equipment and the maximum permitted weight specified in its official documentation. The allowable payload is not independent of the kerb weight: any increase in the weight of the vehicle itself reduces the amount of additional load that can be carried without exceeding the permitted limit.
Load on the roof
The maximum authorised roof load for the Seat Ibiza is 75 kg. This limit must be observed whenever luggage, roof carriers or other equipment is transported on the roof. The weight of the roof carrier or mounting system forms part of the total load supported by the roof and must therefore be included when calculating the combined weight.
Before transporting items on the roof, check that the carrier is suitable for the vehicle and that the load is securely attached. A roof load raises the vehicle's centre of gravity and may affect handling, particularly during cornering, braking or sudden changes of direction. The maximum roof load must not be exceeded even if the carrier itself is rated for a greater weight.
Trailer weight
The maximum permitted vertical drawbar load applied to the ball head of the towing bracket is 50 kg. This value represents the maximum downward force that the trailer coupling may exert on the tow ball under the specified conditions.
When preparing to tow a trailer, ensure that its loading arrangement does not cause the permitted drawbar load to be exceeded. The actual load on the coupling depends on how the trailer and its contents are distributed. The permissible trailer weight and other towing limits must also be checked against the vehicle's official documentation and the specifications of the installed towing equipment.
WARNING Never exceed the maximum permitted vehicle weights, axle loads, roof load or towing-related limits specified for your Seat Ibiza. Overloading can adversely affect braking performance, steering response, vehicle stability and the load-bearing capacity of relevant components. Exceeding the authorised limits increases the risk of losing control of the vehicle, causing an accident or damaging the vehicle and its equipment. Always check the applicable weight restrictions before carrying heavy loads or towing a trailer.
Engine specifications
The following tables contain the engine specifications for the relevant Seat Ibiza versions. The technical data may include performance and other characteristics associated with the individual engine configurations. When comparing the figures, use the information corresponding to the engine and equipment fitted to your vehicle.
a) Varies depending on the equipment.
Values marked with footnote a) may differ according to the equipment installed in the vehicle. Optional features and differences between configurations can influence certain technical characteristics, so the figures should be interpreted in relation to the relevant version.
a) Varies depending on the equipment.
The equipment-dependent values identified by footnote a) may not be identical for every Seat Ibiza fitted with the same engine. Consult the vehicle-specific documentation when an exact specification is required.
Dimensions
The dimensions of the Seat Ibiza are illustrated in Fig. 196 and detailed in the accompanying technical data table. These measurements describe the vehicle's external size and other relevant dimensional characteristics. They can be useful when checking available parking space, garage clearance or compatibility with equipment intended for the vehicle.
Some dimensions may vary according to the wheels and other equipment fitted. When an exact measurement is important, refer to the specifications for your vehicle's particular configuration rather than assuming that every version has identical dimensions.
Fig. 196 Dimensions.
a) This data will change depending on the type of wheel rim. Values for wheel 185/65 R15 ET40.
The dimension identified by footnote a) depends on the wheel rim fitted to the vehicle. The stated reference value applies to a wheel with tyre size 185/65 R15 and rim offset ET40. Other approved wheel and rim combinations may produce a different measurement, so the relevant wheel specification must be considered when interpreting this value.
Radio equipment, frequency band,
maximum transmitting powerHonda Civic Service Manual. Pulley End Crankshaft Oil Seal Replacement (Except K24Z7)
111140 PULLEY SIDE
1.
Battery Terminal - Disconnection
1.
Make sure the ignition switch is in LOCK (0), or the vehicle
ignition in the OFF mode.
2.
...