Honda Civic Service Manual: Secondary HO2S Removal and Installation (Except K24Z7 and R18Z1 (CVT))

Honda Civic Service Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / Engine Control Sensors / Secondary HO2S Removal and Installation (Except K24Z7 and R18Z1 (CVT))

1211U2

1.	Vehicle Lift

1.

Raise the vehicle on a lift, and make sure it is securely supported.

2.	Splash Shield

1.

Remove the splash shield (A).

3.	Secondary HO2S

1.

Disconnect the connector.

2.

Remove secondary HO2S (A).

1.	Secondary HO2S

1.

Install secondary HO2S (A).

2.

Connect the connector.

2.	Splash Shield

1.

Install the splash shield (A).

Knock Sensor Removal and Installation (Except K24Z7)

121188 1. Vehicle Lift 1. Raise the vehicle on a lift, and make sure it is securely supported. ...

MAF Sensor/IAT Sensor Removal and Installation (K24Z7)

1201G0 Removal 1. MAF/IAT Sensor 1. Disconnect the connector. ...

See also:

Honda Civic Owners Manual. Changing the Power Mode
*1: Except U.S. models with continuously variable transmission *2: U.S. models * Not available on all models ENGINE START/STOP Button* ENGINE START/STOP Button Operating Range You can start the engine when the smart entry remote is inside the vehicle. The engine may also run if the ...

© 2016-2026 Copyright www.hocivic.com

0.0207