Honda Civic Owners Manual: Phone Setup
To pair a cell phone (No phone has been paired to the system)
- Press
the button or
the 
button. - Rotate
to select Yes,
then press 
. - Make sure your phone is in search or
discoverable mode, then press
.
- HFL automatically searches for a Bluetooth device.
- When your phone appears on the list, select
it by pressing
.
- If your phone doesn't appear, select
Phone Not Found’ and search for
Bluetooth devices using your phone.
From your phone, select HandsFreeLink.
- The system gives you a pairing code on the audio/information screen.
- Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
- A notification appears on the screen if pairing is successful.
|
Phone Setup Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls. Phone Pairing Tips:
Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side. These icons indicate the following:
|
: The phone can be used
with HFL.
: The phone is compatible
with Bluetooth Audio.To change the currently paired phone
- Press the
button or
the 
button. - Rotate
to select Phone
Setup, then
press 
. - Rotate
to select
Bluetooth Setup, then
press
. - Rotate to select Connect a Phone,
then press
.
- The screen changes to a device list.
- Rotate
to select a
desired device name,
then press 
.
- HFL disconnects the connected phone and starts searching for another paired phone.
To change the pairing code setting
- Press the button or
the button.
- Rotate to select
Phone Setup, then
press .
- Rotate to select
Bluetooth Setup, then
press .
- Rotate to select
Pass-Key, then press
.
- Input a new pairing code, then press
.
To delete a paired phone
- Press the button or
the button.
- Rotate to select Phone
Setup, then
press .
- Rotate to select
Bluetooth Setup, then
press .
- Rotate to select
Delete Device, then
press .
- The screen changes to a device list.
- Rotate to select a
phone you want to
delete, then press .
- A confirmation message appears on the
screen. Rotate to select Yes,
then press
.
HFL Menus
The ignition switch must be in ACCESSORY
or ON
to use HFL.
HFL Menus
To use HFL, you must first pair your Bluetoothcompatible
cell phone to the system while the vehicle
is p ...
Ring Tone
You can change the ring tone setting.
Press the button or
the button.
Rotate to select Phone
Setup, then
press .
Rotate to select
Ringtone, then press
.
&nb ...
See also:
Honda Civic Service Manual. Front Passenger's Weight Sensor Removal and Installation ('13-'14: 2-door)
SRS components are located in this area. Review the SRS component locations
and the precautions and procedures before doing repairs or service.
NOTE: The front passenger's weight sensor is part of the seat frame and
must be replaced as an assembly.
...
