Seat Ibiza (6F) 2017-2026 Owner's Manual: Main beam assist (Light Assist)
The main beam assist system, also known as Light Assist, automatically controls the main beam headlights of the
Seat Ibiza to help prevent dazzling other road users. It monitors traffic ahead and adjusts the headlight
operation when vehicles are approaching from the opposite direction or travelling ahead in the same direction.
By switching between main beam and dipped beam when appropriate, the system helps maintain useful road
illumination while reducing the risk of glare affecting other drivers.
Light Assist also recognises illuminated areas along the route. When the Seat Ibiza approaches or passes through
a populated area with sufficient surrounding lighting, the system can automatically switch off the main beam
headlights. This prevents unnecessary use of high-beam lighting in built-up areas, where street lighting and
other sources of illumination may already provide adequate visibility.
Within its operating limitations, the main beam assist automatically activates or deactivates the main beam
headlights according to the surrounding lighting, detected traffic conditions and vehicle speed. The system is
designed to reduce the need for frequent manual switching between dipped beam and main beam during night
driving. However, its decisions depend on the information detected by the camera and may not always correspond
to the actual road conditions. The driver remains responsible for selecting the appropriate lighting whenever
the automatic system cannot respond correctly.
Switching on the main beam
assist
- Switch on the ignition and set the exterior lighting control to position
. The automatic lighting position is
required for Light Assist to operate. Make sure the lighting switch is correctly selected before attempting
to activate the system using the steering column lever.
- With the turn signal and main beam lever in its neutral position, push the lever forwards, as indicated by
position 3 in Fig. 71. This activates the main beam assistance function, allowing the Seat Ibiza to manage
the main beam headlights automatically according to the detected lighting and traffic conditions.
When Light Assist has been activated, the corresponding control lamp
illuminates in the instrument
cluster display. This indicator confirms that the assistance function is enabled, but it does not necessarily
mean that the main beam headlights are currently illuminated. When the system actually switches on the main
beam, the blue main beam warning lamp
also lights up in the
instrument cluster. The driver can therefore distinguish between the assistance system being active and the main
beam headlights being switched on.
Switching the main beam assist off
- Turn the exterior lighting switch to any position other than
. Moving the switch
away from the automatic lighting position deactivates the main beam assistance function, so the system will
no longer automatically control the main beam headlights.
- Alternatively, when Light Assist is active: Pull the turn signal and main beam lever
backwards towards the steering wheel, as shown in position 4 of Fig. 71. This cancels the automatic main
beam assistance function using the steering column control.
- Alternatively, when Light Assist is enabled but the main beam is not illuminated: Push the
turn signal and main beam lever forwards to switch on the main beam manually. If the main beam then needs to
be switched off, pull the lever backwards towards the steering wheel. This allows the driver to take direct
control of the main beam headlights instead of relying on automatic operation.
- Alternatively, switch off the ignition. Turning off the ignition deactivates the main beam
assistance function. When the vehicle is used again, the driver should check the lighting settings and
activate Light Assist as required.
System limitations
Light Assist cannot reliably identify every road user, lighting condition or situation encountered during a
journey. In certain circumstances, the camera may fail to recognise approaching traffic or other objects that
require the main beam headlights to be switched off. The system may therefore react too late or fail to
deactivate the main beam altogether. In the situations described below, the driver must switch off the main beam
manually whenever necessary to avoid dazzling other road users or creating a dangerous situation.
- Poorly illuminated roads with highly reflective traffic signs. Strong reflections from road
signs may interfere with the system's assessment of the surrounding lighting. On dark roads where reflective
signs are particularly prominent, the automatic main beam control may not respond as expected. The driver
should monitor the lighting and switch to dipped beam whenever appropriate.
- Road users with insufficient lighting. Pedestrians, cyclists and other road users who are
poorly illuminated may be difficult for the camera to detect. Because Light Assist relies on recognising
relevant lighting and traffic conditions, it may not identify these road users in time to deactivate the
main beam headlights. Extra care is required on roads where pedestrians or cyclists may be present.
- Sharp bends, partially concealed oncoming traffic and steep gradients. On tight curves,
approaching vehicles may remain outside the camera's field of view until they are relatively close. Similar
limitations can occur on pronounced uphill or downhill sections, where the road layout temporarily conceals
traffic travelling in the opposite direction. In these circumstances, the driver may need to switch off the
main beam before the system recognises the approaching vehicle.
- Roads with opposing traffic separated by a central barrier. On divided roads, a central
reservation barrier may obstruct the camera's view of vehicles approaching from the opposite direction, even
when their drivers remain exposed to the main beam headlights. This can be particularly relevant for drivers
seated higher above the road, such as lorry drivers, who may be able to see over the barrier. Light Assist
may not detect these vehicles correctly, so manual headlight control may be necessary.
- Fog, snowfall or heavy rain. Adverse weather can reduce visibility and interfere with the
camera's ability to identify other vehicles and surrounding lighting conditions. Light Assist may respond
incorrectly or fail to switch off the main beam at the required moment. The driver must select lighting
suitable for the weather rather than depending exclusively on automatic main beam operation.
- Airborne dust or sand. Swirling dust, blowing sand and similar airborne particles can
obscure the camera's view and affect the detection of traffic and light sources. These conditions may also
reduce the driver's own visibility. When dust or sand is present, the main beam headlights should be
controlled manually whenever the automatic system cannot operate reliably.
- Damage to the windscreen within the camera's field of view. Cracks, chips or other damage
in the area through which the camera observes the road can distort the image available to the system. Even
when the rest of the windscreen remains clear, damage in the camera's viewing area may interfere with the
correct operation of Light Assist.
- Obstruction or contamination of the camera's viewing area. Condensation, dirt, stickers,
snow or ice on the windscreen can partially or completely block the camera's view. If the camera cannot
clearly observe the road ahead, the main beam assist may not detect vehicles or changes in lighting
conditions correctly. Keep the relevant windscreen area clean and unobstructed.
- Camera damage or interrupted electrical power supply. If the camera is damaged or its power
supply is disconnected, Light Assist may be unable to perform its intended function. The driver must then
operate the main beam headlights manually and must not assume that automatic glare prevention remains
available.
WARNING The convenience provided by Light Assist must never encourage the driver to take
unnecessary risks or pay less attention to the road. Although the system can automatically manage the main
beam headlights in many situations, it cannot replace the driver's judgement, concentration or
responsibility for safe lighting. Incorrect or delayed operation may dazzle other road users and increase
the risk of an accident. Always remain attentive to the surrounding traffic and be prepared to intervene
manually.
- Always retain control of the main beam headlights. The driver must ensure that the
lighting is appropriate for the prevailing road, weather and traffic conditions. If Light Assist does
not switch off the main beam when necessary, deactivate it manually without delay. Similarly, use the
appropriate headlight setting whenever the automatic function does not provide suitable illumination for
the driving situation.
- Do not assume that the system can recognise every driving situation. Light Assist may
interpret certain traffic or lighting conditions incorrectly, particularly where visibility is
restricted or other road users are difficult to detect. Its operation is subject to technical
limitations, and it may not always activate or deactivate the main beam at the appropriate moment. The
driver must continue to monitor the road and the headlight operation.
- Keep the camera's field of view clear and the vehicle's lighting system in its intended
configuration. Dirt, coverings or damage affecting the camera's viewing area can interfere
with Light Assist operation. Modifications to the vehicle's lighting equipment may also affect the
system, including the installation of additional headlights. Such changes can alter the lighting
conditions detected by the camera and reduce the reliability of automatic main beam control.
NOTICE To maintain the correct operation of the Seat Ibiza main beam assistance system, the
camera must have an unobstructed view of the road ahead. Dirt, ice, snow or damage in the camera's viewing
area can interfere with its ability to recognise traffic and surrounding lighting. Observe the following
precautions to reduce the risk of impaired operation:
- Clean the camera's viewing area regularly. Keep the relevant section of the windscreen
free from dirt and other deposits that could obstruct the camera. During cold weather, make sure that
snow and ice are removed from this area before driving. A clear windscreen is necessary for the camera
to monitor the road effectively.
- Do not cover the camera's field of view. Avoid placing stickers, accessories or other
objects where they could interfere with the camera's view through the windscreen. Even a partial
obstruction may prevent the system from correctly detecting approaching vehicles or changes in ambient
lighting.
- Inspect the windscreen for damage near the camera. Check that the glass within the
camera's field of view is free from cracks, chips and other defects that could distort the image used by
Light Assist. Damage in this area may affect system performance even if it does not significantly
obstruct the driver's own view.
Note
- The headlight flasher remains available for manual operation at any time using the turn signal and main
beam lever. The driver can therefore activate and release the headlight flasher independently of the
automatic main beam assistance function. This allows the headlights to be flashed manually whenever
appropriate, regardless of whether Light Assist is currently enabled.
- Objects that emit light within the camera's detection area may interfere with Light Assist operation.
For example, a portable navigation device positioned where its illuminated display can influence the
camera may affect the system's interpretation of surrounding lighting conditions. Avoid placing
illuminated accessories where they could interfere with the camera's view or the light information it
receives.
Fig. 70 Dashboard: exterior lighting control panel.
The Seat Ibiza provides separate indications for the fog lights, allowing the driver to check whether the
relevant lighting function is ac ...
The "Coming Home" and "Leaving Home" functions provide exterior orientation lighting around the Seat Ibiza when
entering or leaving the vehicle in darkness. By temporarily illuminating the immediate ...