If you intend to install a child restraint system with universal approval category U in the Seat Ibiza, first verify that the restraint is approved for use in the intended vehicle seating position. Universal approval indicates that the child seat meets the requirements for installation in compatible vehicles, but the seat must still be suitable for the child's size and the vehicle's available seat belt arrangement. Check the child restraint manufacturer's instructions and the vehicle seating position compatibility information before beginning installation. A child seat must not be used in a position identified as unsuitable for its particular configuration.
The child restraint's orange ECE approval label provides information needed to identify its approval category and the applicable child size or weight range. This label should be checked together with the manufacturer's installation instructions to confirm that the restraint can be secured using the Seat Ibiza three-point seat belt. Pay attention to any restrictions concerning the installation direction, seating position or additional supporting components. The approval label establishes the restraint's certification, while the vehicle compatibility information determines whether the selected installation arrangement is permitted.
The following table identifies the available child restraint installation options for the vehicle's seating positions. It distinguishes between configurations that are suitable for the specified child seat category and those in which installation is not permitted. The accompanying notes explain the additional conditions that apply to particular seating positions and restraint designs. Always use the table together with the instructions supplied by the child seat manufacturer.
X: This designation indicates that the seating position is not compatible with a child restraint installed in the specified configuration. Do not attempt to install a child seat in a position marked X for its category, even if the vehicle's seat belt can physically be routed around the restraint. Select another approved seating position or use a compatible child restraint system.
U: This designation identifies a seating position suitable for installing a child restraint with universal approval in the specified configuration. The child seat must still be appropriate for the child's height and weight, and the installation must follow the restraint manufacturer's instructions. Confirm that the seat belt can be routed and fastened correctly and that no vehicle components interfere with the child seat's intended position.
a) Do not install a semi-universal child restraint that uses the vehicle's seat belt together with a support leg in the centre rear seating position. The floor clearance in this area does not provide the same installation conditions as the outer seating positions, and the support leg may be unable to stabilise the restraint correctly. A child seat requiring this attachment arrangement must be installed only in a seating position approved by its manufacturer and identified as compatible with the vehicle.
b) When a child restraint is installed on the front passenger seat in a permitted configuration, position the seat as far away from the front passenger airbag as possible. Make sure that the upper anchorage point of the vehicle's seat belt remains behind the child seat so that the belt follows the intended routing. This positioning requirement does not remove the restrictions concerning rear-facing child restraints and active front passenger airbags. A rear-facing child seat must never be installed in front of an enabled passenger airbag.
c) If the front passenger seat does not have height adjustment, move it to its rearmost position before installing the approved child restraint. If the seat is equipped with height adjustment, move it to the rearmost and highest position. These adjustments help establish the seating arrangement specified for the child restraint installation. After positioning the seat, check that the child restraint can be secured correctly and that the vehicle's seat belt follows the required path without twisting or interference.
Fitting a child seat using the seat belt

Fig. 39 On rear seats: installing a child seat.
WARNING Children must always travel in a restraint system appropriate for their age, weight and height. The restraint must be approved for the intended vehicle seating position and installed correctly before the journey begins. A child who is not properly secured may suffer severe or fatal injuries during sudden braking or a collision. Never allow a child to travel without the protection of a suitable child seat or, when appropriate for their size, a correctly positioned vehicle seat belt.
Fitting a child seat to the middle seat of the rear bench using the seat belt

Fig. 40 Position of the belt buckle on the rear
seat
Child restraint systems must be positioned centrally on the vehicle seat on which they are installed. This ensures that the restraint occupies the intended seating area and that the vehicle's seat belt can follow the routing specified by the child seat manufacturer. When installing a child seat in the centre position of the Seat Ibiza rear bench, particular attention must be paid to the arrangement of the two adjacent seat belt buckles. Incorrect buckle positioning can interfere with the child seat installation or cause the belt to become twisted. Follow the instructions below to ensure that the restraint is correctly centred and secured using the appropriate seat belt.
Top Tether securing beltsHonda Civic Service Manual. License Plate Light Removal and Installation - Double Lights ('13-'14: 4-door)
1.
Trunk Lid Trim Panel
1.
Remove the trunk lid trim panel (A).
2.
Inner Taillight Both
1.
Disconnect ...