
Pressing the
(windshield
defroster) button
turns the air conditioning system on and
automatically switches the system to fresh air
mode.
Press the
button again to turn off,
the
system returns to the previous settings.

For your safety, make sure you have a clear view through all the windows before driving.
Do not set the temperature near the upper or lower limit.
When cold air hits the windshield, the outside of the windshield may fog up.
If the side windows fog up, adjust the vents so that the air hits the side windows.
To rapidly defrost the windows

1. Press the
button.
2. Press the
button.
To rapidly defrost the windows
After defrosting the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.

You can set the temperature synchronously for the driver’s side and the passenger’s side in synchronized mode.
1. Press the SYNC button.
2. Adjust the temperature using the driver’s side temperature control dial.
Press the SYNC button to return to dual mode.
When the system is in dual mode, the driver’s side temperature and the passenger’s side temperature can be set separately.
Using Automatic Climate Control
Automatic Climate Control SensorsHonda Civic Service Manual. Passenger's Dashboard Trim Panel Removal and Installation (Without Navigation)
8411K3
1.
Driver's Dashboard Lower Cover
1.
Remove the driver's dashboard lower cover (A).
2.
Dashboard Subdisplay Visor
...