
Fig. 32 Examples of child seats.
Only officially approved child restraint systems that are suitable for the child's size and the intended vehicle seating position should be used in the Seat Ibiza. Child seats differ in their construction, installation methods and approved occupant ranges. Selecting the correct restraint therefore requires checking its approval label, the manufacturer's instructions and the child's current height and weight. A child seat must also be compatible with the vehicle's available attachment points and the seating position in which it will be installed.
Child restraint systems covered by these classifications are approved under the ECE-R44 or ECE-R129 standards. The abbreviation ECE-R refers to regulations established under the United Nations Economic Commission for Europe framework. ECE-R44 classifies child restraints primarily according to the child's weight, whereas ECE-R129 uses height-based approval ranges and introduces additional requirements for child restraint systems. The approval standard shown on the child seat identifies the requirements under which that particular model was tested and certified. Applicable rules concerning the sale and use of seats approved under older standards may vary by country.
Child seats by weight group as per ECE-R44 and height as per ECE-R129
Under the ECE-R44 classification, child seats are divided into five principal weight groups: 0, 0+, 1, 2 and 3. These groups indicate the weight ranges for which the restraint has been approved. Under ECE-R129, the approved height range is used to determine whether a child is suitable for a particular seat, with any additional limits specified by the manufacturer also applying. The following illustrations show the classifications used by the two standards and help distinguish between weight-based and height-based child restraint selection.
Group as per ECE-R44
Child height as per ECE-R129
Child restraint systems tested and approved under ECE-R44 or ECE-R129 carry an official approval marking identifying the relevant standard. The label includes a circled letter "E" and an associated approval number, allowing the restraint's certification to be identified. This marking provides confirmation that the seat has been approved under the indicated regulation, but it does not automatically mean that the restraint is suitable for every child or compatible with every seating position in the Seat Ibiza. The approved height or weight range and the installation requirements must still be checked.
When installing or using any child seat, follow the manufacturer's instructions and comply with the legal requirements in force where the vehicle is operated. The instructions specify how the restraint must be secured, how the child should be positioned and which attachment methods are permitted. Never improvise an installation or substitute an attachment arrangement that has not been approved for the restraint. Check the seat's installation and the child's harness or seat belt positioning before every journey.
It is advisable to keep the child restraint manufacturer's instruction manual together with the Seat Ibiza on-board documentation. The manual provides the information needed to confirm compatibility, install the restraint correctly and make adjustments when the child's height or weight changes. It is also useful if the child seat needs to be removed, reinstalled or transferred to another approved seating position.
SEAT recommends selecting child restraint systems from its Original Accessories Catalogue. The child seats offered through this range have been selected and tested for use in compatible SEAT vehicles, helping owners identify suitable products for their particular model. A SEAT dealer can provide information about available child seats and assist with selecting a restraint appropriate for the child's age, height and weight. When choosing a seat for the Seat Ibiza, confirm that the exact child restraint model is approved for the intended seating position and that all required anchorage points are available.
Child seats by approval category
In addition to their weight or height classification, child restraint systems are assigned approval categories that determine the vehicles and seating positions in which they may be installed. Under ECE-R44, these categories include universal, semi-universal and vehicle-specific approval. Under ECE-R129, the i-Size category establishes requirements relating to the restraint's installation and safety performance. Understanding these approval categories is important because a child seat may meet the relevant safety standard without being suitable for every vehicle or seating position.
For universal ISOFIX child restraints approved under ECE-R44, a Top Tether strap is provided as an additional anchorage. This strap must be connected to the designated Top Tether anchorage point and adjusted according to the child seat manufacturer's instructions. Its purpose is to provide the additional restraint required by the approved installation arrangement. Never attach the Top Tether to an unsuitable point or leave it unsecured when the child seat requires it.
Semi-universal child seats are supplied with a vehicle compatibility list identifying the models and, where specified, the seating positions in which they may be installed. Before fitting such a restraint in the Seat Ibiza, consult the manufacturer's current compatibility information and confirm that the vehicle version and intended seating position are included. Do not install a semi-universal restraint solely because its attachment points appear to fit.
The child restraint manufacturer provides a list of vehicle models for which the seat has been approved. Check this list before installation and verify that the Seat Ibiza model and the chosen seating position are covered. The restraint must be fitted exactly as described in its instructions, using the specified attachment points and installation method. Compatibility with one vehicle model does not automatically establish suitability for another.
Before choosing an i-Size child seat for the Seat Ibiza, confirm that the intended vehicle seating position is suitable for the restraint. Child seat manufacturers can provide information about which of their products have i-Size approval and whether a particular model is compatible with the vehicle. Follow the manufacturer's instructions concerning the approved height range, installation direction, ISOFIX attachments and any additional securing devices. The restraint must be used only within the limits of its approval and in a seating position that supports its prescribed installation.
Introduction
Fitting and using child seatsHonda Civic Owners Manual. Adding Engine Oil
Unscrew and remove the engine oil fill cap.
Add oil slowly.
Reinstall the engine oil fill cap, and tighten
it securely.
Wait for three minutes and recheck the
engine oil dipstick.
Adding Engine Oil
NOTICE Do not fill the engine oil above the upper ...