Honda Civic manuals

Honda Civic Service Manual: Center Console Beverage Holder Removal and Installation

Honda Civic Service Manual / Body / Body Interior / Cup Holders / Center Console Beverage Holder Removal and Installation

044100

Removal

1. M/T Shift Lever Knob

Except K24Z7 engine

1.

Except K24Z7 engine: Lower the shift lever boot (A) to release the hooks from the boot.

2.

Except K24Z7 engine: Remove the shift lever knob (B).

K24Z7 engine

3.

K24Z7 engine: Lower the shift lever boot (A) to release the hooks from the boot.

4.

K24Z7 engine: Loosen the shift lever boot ring (B).

5.

K24Z7 engine: Remove the shift lever knob (C).

6.

K24Z7 engine: Remove the shift lever boot ring.
2. Center Console Panel Assembly (M/T)

1.

Remove the center console panel (A).
3. Center Console Panel Assembly (A/T)

1.

Detach the clips (A).

2.

Remove the center console panel (A).
4. Cup Holder Panel Assembly

1.

Remove the cup holder panel assembly (A).
5. Cup Holder Assembly

1.

Remove the cup holder assembly (A).

Installation

1. Cup Holder Assembly

1.

Install the cup holder assembly (A).
2. Cup Holder Panel Assembly

1.

Install the cup holder panel assembly (A).
3. Center Console Panel Assembly (A/T)

1.

Install the center console panel (A).

2.

Install the clips (A).
4. Center Console Panel Assembly (M/T)

1.

Install the center console panel (A).
5. M/T Shift Lever Knob

Except K24Z7 engine

1.

Except K24Z7 engine: Install the shift lever knob (A).

NOTE: Tighten the shift lever knob until the shift pattern is properly aligned.

2.

Except K24Z7 engine: Connect the shift lever boot (B).

K24Z7 engine

3.

K24Z7 engine: Install and turn the shift lever boot ring (A) until it reaches the bottom of the threads on the shift lever.

4.

K24Z7 engine: Turn the shift lever knob (B) until the shift lever knob contacts the shift lever boot ring.

5.

K24Z7 engine: Tighten the shift lever boot ring and the shift lever knob together with the shift pattern properly aligned.

6.

K24Z7 engine: Connect the shift lever boot (C).
Cup Holders
...

Rear Seat Armrest Beverage Holder Removal and Installation
0441A2 Removal 1. Rear Seat Armrest Beverage Holder 1. Release the hooks (A) of the rear seat armrest ...

See also:

Honda Civic Owners Manual. LKAS Conditions and Limitations
The system may not detect lane markings and therefore may not keep the vehicle in the middle of a lane under certain conditions, including the following: Environmental conditions  Driving in bad weather (rain, fog, snow, etc.).  Sudden changes between light and dark, such as an e ...

© 2016-2026 Copyright www.hocivic.com

0.0063