Honda Civic Service Manual: Catalytic Converter Removal and Installation (R18Z1)
|
|
1.
|
Disconnect the connector.
|
|
2.
|
Remove the A/F sensor (A).
|
|
|
|
1.
|
Remove the exhaust chamber cover (A).
|
|
|
|
1.
|
Remove the EGR pipe (A).
|
|
|
|
1.
|
Raise the vehicle on a lift, and make sure it is securely supported.
|
|
|
1.
|
Remove the splash shield (A).
|
|
|
1.
|
Remove the engine undercover (A).
|
|
|
|
1.
|
Disconnect the connector.
|
|
2.
|
Remove secondary HO2S (A).
|
|
|
|
1.
|
Remove the catalytic converter (A).
|
|
2.
|
Remove the catalytic converter cover (B).
|
|
|
|
1.
|
Install the catalytic converter cover (A).
|
|
2.
|
Install the catalytic converter (B) with new gaskets (C).
|
|
|
|
1.
|
Install secondary HO2S (A).
|
|
2.
|
Connect the connector.
|
|
|
|
1.
|
Install the engine undercover (A).
|
|
|
1.
|
Install the splash shield (A).
|
22mmmmreplace
|
|
1.
|
Install the EGR pipe (A) with new gaskets (B).
|
|
|
|
1.
|
Install the exhaust chamber cover (A).
|
|
|
|
1.
|
Install the A/F sensor (A).
|
|
2.
|
Connect the connector.
|
|
1.
Vehicle Lift
1.
Raise the vehicle on a lift, and make sure it is securely supported.
2. ...
121150
1.
Engine Cover
1.
Remove the engine cover.
2.
EGR Valve
...
See also:
Honda Civic Owners Manual. Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the
hard surfaces
of the blade may scratch the window glass.
Changing the Wiper Blade Rubber
Turn the ignition switch to LOCK 0*1.
While holding the wiper switch in the MIST
position, t ...