Honda Civic Owners Manual: Uniform Tire Quality Grading
Honda Civic Owners Manual / Maintenance / Checking and Maintaining Tires / DOT Tire Quality Grading (U.S. Vehicles) / Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
|
Uniform Tire Quality Grading For example: Treadwear 200 All passenger car tires must conform to Federal Safety Requirements in addition to these grades. |
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety
Requirements. All tires are also graded for treadwear, traction,
and temperature performance according to Department of
Transportation (DOT) s ...
Treadwear
The treadwear grade is a comparative rating based on the wear
rate of the tire when tested under controlled conditions on a
specified government test course. For example, a tire graded 150
would we ...
See also:
Honda Civic Owners Manual. Getting Ready to Replace the Flat Tire
Open the trunk floor lid.
Take the tool case out of the trunk. Take
the jack and wheel nut wrench out of the
tool case.
Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire.
Place a wheel block or rock in front and rear
of the whee ...
© 2016-2026 Copyright www.hocivic.com
0.0061