Honda Civic manuals

Honda Civic Service Manual: Secondary HO2S Removal and Installation (Except K24Z7 and R18Z1 (CVT))

Honda Civic Service Manual / Powertrain / Transmission/Transaxle / Automatic / Secondary HO2S Removal and Installation (Except K24Z7 and R18Z1 (CVT))

1211U2

1. Vehicle Lift

1.

Raise the vehicle on a lift, and make sure it is securely supported.


2. Splash Shield

1.

Remove the splash shield (A).


3. Secondary HO2S


1.

Disconnect the connector.


2.

Remove secondary HO2S (A).


1. Secondary HO2S


1.

Install secondary HO2S (A).


2.

Connect the connector.


2. Splash Shield

1.

Install the splash shield (A).


Rocker Arm Oil Pressure Sensor (EOP Sensor) Removal and Installation (Except K24Z7 and R18Z1 (CVT))
1211K2 1. EOP Sensor 1. Remove the bracket (A) and the EOP sensor (B). 1 ...

Shift Lock Unit Removal and Installation (A/T, CVT)
7431A1 NOTE: Do not wipe off the special grease applied to the area of the shift lever marked with an asterisk (*) when you disassemble it. 1. Center Console ...

See also:

Honda Civic Owners Manual. Brake Light, Tail/Rear Side Marker Light, Rear Turn Signal Light and Back-Up Light Bulbs
When replacing, use the following bulbs. Brake Light: 21 W Tail/Rear Side Marker Light: LED Rear Turn Signal Light: 21 W (Amber) Back-Up Light: 16 W Use a Phillip-head screwdriver or socket to remove the bolts.  Pull the light assembly out of the rear pillar. ...

© 2016-2024 Copyright www.hocivic.com

0.0254