Honda Civic manuals

Honda Civic Service Manual: Output Shaft (Countershaft) Speed Sensor Removal and Installation (K24Z7)

Honda Civic Service Manual / Powertrain / Transmission/Transaxle / Output Shaft (Countershaft) Speed Sensor Removal and Installation (K24Z7)

2131J4

1. Vehicle Lift

1.

Raise the vehicle on a lift, and make sure it is securely supported.

2. Front Engine Under Cover Plate

1.

Remove the front engine under cover plate (A).

3. Output Shaft (Countershaft) Speed Sensor


1.

Disconnect the connector.

2.

Remove the output shaft (countershaft) speed sensor (A).

1. Output Shaft (Countershaft) Speed Sensor


1.

Install the output shaft (countershaft) speed sensor (A) with a new O-ring (B).

2.

Connect the connector.

2. Front Engine Under Cover Plate

1.0mmumiouum

1.

Install the front engine under cover plate (A).

Transmission/Transaxle
...

Flywheel Removal and Installation (R18Z1 M/T)
210101 Removal 1. Pressure Plate 1. Install the ring gear holder. ...

See also:

Honda Civic Owners Manual. Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting upright and well back in the seat: Adjusting the Seats 1. Pull the seat belt out slowly. 2. Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure. Make sure that the be ...

© 2016-2025 Copyright www.hocivic.com

0.007