The road sign detection system in the Seat Ibiza operates within certain technical and environmental limits. Although it can recognise and display relevant traffic signs, its performance depends on the visibility of those signs, the condition of the camera's field of view and the information available to the system. Under some circumstances, road signs may be recognised incorrectly, displayed with incomplete information or not detected at all. The driver must therefore continue to observe roadside signs and comply with the applicable traffic regulations, regardless of the information shown in the instrument cluster.
The following situations can restrict the operation of the road sign detection system or prevent it from functioning correctly. Several of these factors may occur at the same time, making reliable recognition particularly difficult:
Driving with the speed warning function
Operating conditions
The speed warning function is designed to provide notifications when the Seat Ibiza is travelling at speeds above 20 km/h. Within its operating limits, the function uses the available speed limit information to warn the driver when the relevant warning conditions are met. At speeds of 20 km/h or below, the driver should not expect this function to provide a speed warning. The system is intended to support awareness of speed restrictions, but it does not replace the speedometer, roadside signs or the driver's responsibility to observe the applicable limits.
Connection and disconnection
Depending on the country in which the vehicle is operated, the speed warning function may be activated automatically whenever the ignition is switched on. Where this automatic activation applies, the infotainment system presents an overview of the individual assistance systems and functions that have been enabled. This information appears in the corresponding input menu, allowing the driver to review the automatically activated features before or at the beginning of a journey. The availability of manual deactivation depends on the applicable vehicle configuration and country-specific requirements.
If permitted by the vehicle's configuration, the speed warning function can be switched off manually through the infotainment system. Deactivating the function prevents it from providing the corresponding speed warnings while it remains disabled. The driver must continue to monitor vehicle speed and comply with traffic regulations independently of the system.
1. Open the Assistance systems menu in the infotainment system. This menu provides access to the available driver assistance functions and their configurable settings.
2. Select the corresponding speed warning submenu and switch the function on or off as required. Check the displayed setting to confirm whether the warning function is currently active. Depending on the country, it may be activated automatically again the next time the ignition is switched on.
Activating and deactivating the audible warning
The speed warning function can provide an audible notification in addition to the information displayed by the vehicle. The audible signal is intended to attract the driver's attention when the system identifies a condition requiring a speed warning. Where the relevant setting is available, the sound can be enabled or disabled independently through the infotainment system. Changing this setting affects the audible notification rather than the driver's obligation to observe the applicable speed limit.
To adjust the audible warning, use the following infotainment system controls:
1. Open the Assistance systems menu to display the available assistance functions and their settings.
2. Select Speed Warning to access the options associated with speed-related notifications.
3. Locate the corresponding audible warning option and activate or deactivate it according to your preference. The selected setting determines whether the system provides the associated sound when a speed warning is triggered.
Note The audible warning is automatically activated whenever the ignition is switched on. Consequently, a manual change made during a previous journey may not remain in effect after the vehicle has been switched off and restarted. Check the current setting if you wish to know whether audible speed warnings are enabled.
Adjusting the warning thresholds
The speed warning function allows the driver to adjust the warning thresholds manually. These settings influence the point at which the system responds to the speed limit information it has identified. Adjusting the threshold changes the warning behaviour but does not alter the legal speed limit or permit the vehicle to be driven faster than the applicable restriction. The selected setting should therefore be understood as a notification preference rather than an indication of a permitted driving speed.
The warning threshold can be configured through the infotainment system using the following procedure:
1. Open the Assistance systems menu to access the settings for the vehicle's driver assistance functions.
2. Select Speed Warning to display the available speed warning configuration options.
3. To choose the desired warning threshold level, tap
in the
Overtaking warning menu option. Use the available setting to select the required threshold
level and check the displayed value before leaving the menu.
Note Whenever the ignition is switched on, the speed warning thresholds are restored to their default values. A threshold selected manually during an earlier journey is therefore not necessarily retained for the next journey. If a different warning threshold is required, it must be adjusted again after the ignition has been switched on.
Activation and deactivation of the speed change warning tone
The speed change warning tone provides an audible indication when the system identifies a change in the applicable speed limit. This allows the driver to become aware of updated speed limit information without relying exclusively on the visual indication in the instrument cluster. If preferred, the sound associated with a change in the recognised speed limit can be switched off manually through the infotainment system. This setting concerns the notification tone for speed limit changes and should be distinguished from the audible warning associated with the speed warning function itself.
To change the speed limit notification tone setting, proceed as follows in the infotainment system:
1. Open the Assistance systems menu to view the available assistance functions and their settings.
2. Select Speed Warning to access the controls for speed-related indications and audible notifications.
3. Find the corresponding speed change tone option and activate or deactivate it as required. When enabled, the tone provides audible information about recognised changes in speed limits. When disabled, the associated change tone is suppressed, but the driver must still observe the actual roadside signs and applicable speed restrictions.
Concealing fault messages via the multifunction steering wheel
1. If a fault or information message associated with the system appears in the instrument cluster, press the
button on the multifunction steering wheel to conceal the notification. This allows the normal instrument
cluster information to be displayed again. Dismissing a message does not correct the underlying fault or restore
a function that is unavailable. If the message indicates a malfunction, follow the relevant instructions and
arrange for the problem to be investigated when necessary.
Trailer mode
On Seat Ibiza vehicles equipped with a factory-installed towbar, the road sign recognition system can take account of certain traffic restrictions that apply when towing a trailer. This functionality is available when a trailer is electrically connected to the vehicle. Through the vehicle settings menu in the infotainment system, the recognition of trailer-related traffic signs can be activated or deactivated. Relevant restrictions may include speed limits applicable to vehicles towing trailers and overtaking prohibitions that specifically affect such combinations. These restrictions can differ from those applying to a vehicle travelling without a trailer, making it important to interpret the displayed information according to the actual towing conditions.
When trailer mode is active, the recognition of applicable speed limits can be adjusted to reflect the type of trailer being towed and the legal requirements of the country in which the vehicle is driven. Because trailer-related restrictions vary between countries and may depend on the characteristics of the trailer, the displayed information should be treated as supplementary guidance. The driver remains responsible for knowing and observing the speed limits and overtaking regulations that apply to the vehicle and trailer combination, even if the road sign recognition system does not display the corresponding restriction.
To access the trailer-related settings in the infotainment system, follow these steps:
1. Open the Assistance systems menu to access the configuration options for the vehicle's available driver assistance functions.
2. Select Trailer detection to open the settings associated with recognising a connected trailer and applying the relevant trailer-related functions.
3. To adapt the warning threshold for trailer mode, tap
in the
Overtaking warning menu option. Select the setting appropriate to the trailer and the
applicable country-specific requirements. The configured warning threshold influences the system's notifications
but does not replace the legal restrictions governing the vehicle and trailer combination.
Introduction
Speed warning function warning levelsHonda Civic Service Manual. Rear Door Glass Adjustment (4-door)
Removal
1.
Rear Door Power Window Switch Panel
1.
Remove the power window switch panel (A).
2.
Rear Door ...