Seat Ibiza (6F) 2017-2026 Owner's Manual: Introduction
Changing a wheel on your Seat Ibiza requires suitable tools, a secure working location and a clear understanding
of the correct procedure. Only attempt to replace a wheel yourself if you are familiar with the necessary
operations and safety precautions and are confident that the work can be completed without putting yourself or
other road users at risk. The vehicle must be parked securely, and the ground must be sufficiently firm and
level to support the vehicle and the lifting equipment safely.
Before beginning, assess the surrounding conditions carefully. Changing a wheel beside a busy road, on unstable
ground or in poor visibility can be dangerous, even when the mechanical procedure itself is straightforward. If
the vehicle cannot be positioned safely, or if the necessary tools are unavailable, seek professional roadside
assistance rather than attempting the replacement under hazardous conditions. Personal safety and the safety of
other road users must take priority over completing the wheel change immediately.
Preliminary actions
- Stop the Seat Ibiza in a safe location on a firm, level surface, as far away from moving traffic as
reasonably possible. Choose an area where the vehicle can remain stationary without obstructing other road
users and where there is enough space to work safely around the affected wheel. Avoid soft ground, steep
slopes and uneven surfaces that could make the vehicle unstable when raised. If possible, position the
vehicle away from bends or other locations where approaching drivers may have limited visibility.
- Apply the parking brake firmly before leaving the driver's seat. The parking brake helps prevent the vehicle
from moving while the wheel is being changed. Make sure it is fully engaged and do not release it during the
procedure. The parking brake should be used together with the appropriate transmission setting to secure the
vehicle as effectively as possible.
- Switch on the hazard warning lights to alert approaching traffic that the vehicle is stationary and may
present an obstruction. Hazard lights improve the visibility of the stopped vehicle, particularly in poor
weather, reduced daylight or areas with moving traffic. They do not replace the need to position the vehicle
safely or use any additional warning equipment required by local regulations.
- Manual transmission: Select first gear after stopping the engine and applying the parking
brake. Engaging a gear provides an additional means of helping prevent unintended vehicle movement while the
wheel is being changed. Make sure the vehicle is fully stationary before selecting the gear and beginning
the procedure.
- Automatic transmission: Move the transmission selector into the parking position
P and ensure that the parking lock is engaged. The parking position helps secure the
transmission against unintended movement. Always apply the parking brake as well, rather than relying on the
parking lock alone to hold the vehicle stationary.
- If the Seat Ibiza is towing a trailer, disconnect the trailer before attempting to change a wheel. The
additional weight and forces associated with an attached trailer can affect vehicle stability during
lifting. Unhitch the trailer only when it can be done safely, and secure it separately so that it cannot
move. Do not attempt to raise the vehicle while the trailer remains connected.
- Take out the vehicle's on-board tools and prepare the replacement wheel before beginning the wheel change.
Check that the required equipment is available and suitable for the task, including the tools needed to
loosen and tighten the wheel fasteners. If the vehicle is fitted with anti-theft wheel bolts, locate the
corresponding adapter. Position the tools and replacement wheel where they can be reached easily without
obstructing traffic or creating a tripping hazard. Preparing the equipment in advance helps minimise the
time spent working beside the vehicle.
- Comply with all legal requirements applicable to roadside stops and wheel changes in the country where you
are driving. Depending on local regulations, this may include wearing a high-visibility reflective vest,
placing warning triangles or using an approved warning beacon. Position any required warning equipment in
accordance with the relevant rules and only when it is safe to do so. Requirements can vary between
countries, so drivers should be familiar with the regulations that apply to their journey.
- Ask all passengers to leave the vehicle before the wheel-changing procedure begins. They should move to a
safe location well away from the vehicle and passing traffic, preferably behind a roadside safety barrier
where one is available. Do not allow anyone to remain inside the Seat Ibiza while it is being raised or to
stand near the lifting equipment. Children and other passengers must be kept clear of the working area
throughout the procedure. No one should approach the vehicle until it has been safely lowered and the wheel
change is complete.
WARNING
Changing a wheel can be dangerous if the vehicle is not properly secured or if the work is carried out in an
unsafe location. A vehicle that moves unexpectedly or becomes unstable while raised can cause serious
injuries. Before beginning, make sure the parking brake is applied, the transmission is secured and all
occupants are outside the danger area. Never attempt to change a wheel where passing traffic, unstable
ground or other hazards make the procedure unsafe.
- Always follow the preliminary safety measures described above and take appropriate precautions to protect
yourself, your passengers and other road users. Park the vehicle securely, activate the hazard warning
lights and use any warning equipment required by local law. Keep passengers away from the vehicle and
traffic, and do not begin the wheel change until the working area is safe. If the conditions do not
allow the procedure to be carried out safely, contact a professional roadside assistance service.
- If a wheel must be changed while the vehicle is on a slope, take additional precautions to prevent
unintended movement. Secure the wheel diagonally opposite the wheel being changed using a suitable wheel
chock or, if necessary, a sufficiently stable stone or similar object. Position the obstruction so that
it prevents the vehicle from rolling in the direction of the slope. This precaution is intended to
supplement the parking brake and transmission lock, not replace them. Because lifting a vehicle on an
incline presents an increased risk of instability, use a level surface whenever possible and do not
attempt the procedure if the vehicle cannot be secured safely.
Fig. 181 In the luggage compartment: remove
the subwoofer.
The temporary spare wheel in the Seat Ibiza is located beneath the floor panel of the luggage compartment. It is
held securel ...
See also:
Honda Civic Owners Manual. Tire and Wheel Replacement
Replace your tires with radials of the same size, load range, speed rating,
and
maximum cold tire pressure rating (as shown on the tire's sidewall). Using tires
of a
different size or construction can cause certain vehicle systems such as the ABS
and
Vehicle Stability Assist (VSA) system to ...