Honda Civic manuals

Honda Civic Service Manual: Injector Control Module Removal and Installation (R18A9)

Honda Civic Service Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / Injector Control Module Removal and Installation (R18A9)

Removal

1. Injector Control Module (Natural Gas Model)

1.

Remove the injector control module (A).


Installation

1. Injector Control Module (Natural Gas Model)

1.

Install the injector control module (A).


Rocker Arm Oil Pressure Sensor (EOP Sensor) Removal and Installation (Except K24Z7 and R18Z1 (CVT))
1211K2 1. EOP Sensor 1. Remove the bracket (A) and the EOP sensor (B). 1 ...

Ignition Timing Inspection (Except K24Z7)
1. HDS DLC - Connection 1. Connect the HDS to the data link connector (DLC) (A) located under the dr ...

See also:

Honda Civic Owners Manual. Checking the Coolant
Check the amount of coolant in the reserve tank.  If the coolant level is below the MIN mark, add the specified coolant until it reaches the MAX mark.  Inspect the cooling system for leaks. Engine Coolant WARNING Removing the reserve tank cap while the ...

© 2016-2026 Copyright www.hocivic.com

0.0144