The driving data display in the Seat Ibiza provides an overview of journey statistics, fuel consumption and other information relating to the vehicle's operation. Depending on the instrument cluster version and available equipment, the driver can review current and average fuel consumption, distance travelled, journey duration, average speed and estimated remaining range. These readings make it easier to monitor driving habits, compare journeys and understand how different operating conditions affect fuel use. The information is organised into selectable displays and memories, allowing both individual trips and longer periods of driving to be monitored.
Change from one display to another
Changing memory
button
on the multifunction steering wheel to switch between the three available driving data memories. Each memory
records information over a different period, allowing the driver to distinguish statistics for the current
journey, the distance travelled since refuelling and accumulated long-term driving data. The memories
operate as follows:
Delete journey data presets
button on the multifunction steering wheel for approximately two seconds. The selected memory is reset,
allowing new driving data to be collected from that point onward. This operation affects the chosen journey
data memory rather than the vehicle's permanent total odometer reading.Select the instructions
Different journey statistics and driving information can be selected through the Vehicle settings menu in the infotainment system. The available displays depend on the equipment installed in the Seat Ibiza and the information supported by its instrument cluster. Each reading provides a different view of vehicle operation, from immediate fuel consumption to accumulated journey statistics. The following driving data indications may be available:
Travelling time: This indication shows the duration of the journey in hours (h) and minutes (min), measured from the time the ignition was switched on. It allows the driver to monitor how long the vehicle has been in use during the relevant journey and provides a useful reference when reviewing trip statistics alongside distance travelled and average speed.
Setting the trip recorder (trip) to zero.
is selected. Check that the display shows the partial distance counter you intend to reset rather than the
total odometer, which records the vehicle's accumulated distance.
button on
the multifunction steering wheel for approximately two seconds. The trip recorder is reset to zero and
begins measuring distance again as the vehicle is driven. This is useful when recording the length of an
individual journey or monitoring the distance travelled from a particular starting point.Setting a speed warning
button on the multifunction steering wheel to store the vehicle's current speed as the warning threshold and
activate the function. The instrument cluster uses this value as the initial setting, which can then be
adjusted if a different warning speed is required.
button again to confirm it, or wait a few seconds for the setting to be accepted. The selected speed is
stored and the warning function becomes active. If the vehicle subsequently exceeds the configured
threshold, the corresponding warning is displayed in the instrument cluster.
button to switch off the speed warning and delete the previously stored threshold. The function can be
configured for speeds between 30 and 250 km/h (18 and 155 mph). The driver remains responsible for observing
applicable speed limits and selecting a speed appropriate to road and traffic conditions, regardless of
whether this warning is enabled.Oil temperature display
Under normal driving conditions, the engine is considered to have reached its operating temperature when the
engine oil temperature is between approximately 80 °C (176 °F) and 120 °C (248 °F). The oil temperature
indication provides useful information about the engine's thermal condition and can help the driver recognise
when the engine has warmed sufficiently for normal operation. If the engine is subjected to a heavy load,
particularly when the outside temperature is high, the oil temperature may rise above the values normally
observed during less demanding driving. An increase under these conditions does not necessarily indicate a
malfunction, provided that the relevant warning lamps
or
do not appear on the instrument cluster display. If either warning is shown, follow the associated instructions
and do not assume that the temperature reading alone confirms that the engine can continue operating safely.
Warning and information messages
When the ignition is switched on, and while the Seat Ibiza is being driven, the vehicle's monitoring systems check the condition and operation of certain components and functions. These checks help identify malfunctions, abnormal operating conditions and situations that may require the driver's attention. The instrument cluster communicates the results through warning symbols, explanatory messages and other indications, depending on the system involved and the equipment installed.
When a fault is detected, the instrument cluster may display a red or yellow warning symbol together with a message describing the problem or the action required. In some circumstances, an audible warning also sounds to emphasise the importance of the notification. Red warnings generally identify conditions requiring immediate attention, while yellow warnings indicate faults or operating conditions that should be investigated promptly. The driver should assess each warning according to its meaning and follow the instructions displayed.
The appearance, wording and arrangement of warning messages and symbols may differ between instrument cluster versions. Some Seat Ibiza displays provide detailed text explaining the detected condition, while others rely more heavily on warning lamps and shorter messages. The information presented may also depend on the equipment fitted to the vehicle and the particular fault being reported.
Warnings relating to faults that are already present can also be reviewed manually rather than waiting for them to appear automatically. This allows the driver to check the vehicle's reported condition and identify active notifications that may require further attention. Reviewing stored or current warnings is particularly useful when several messages have appeared during the same journey.
To review the available fault information, open the Vehicle status menu. This menu provides access to the relevant vehicle status indications and warnings supported by the instrument cluster. Read the displayed messages carefully and follow any instructions concerning inspection, repair or restrictions on continued driving.
Priority 1 warning (in red)
A priority 1 warning is indicated by a red symbol that illuminates continuously or flashes, sometimes accompanied
by an audible warning signal. It identifies a serious condition that may present an immediate danger or require
the vehicle to be stopped. If the
Stop
driving! warning appears, do not continue the journey. Bring the vehicle to a stop as soon as it is
safe to do so, taking account of surrounding traffic and road conditions. Check the reported fault and follow
the instructions for the affected system. The cause must be corrected before driving is resumed where continued
operation is unsafe. If the problem cannot be resolved safely, obtain assistance from a qualified specialist.
Priority 2 warning (in yellow)
A priority 2 warning appears as a yellow symbol that may remain illuminated or flash. Depending on the fault, the indication may also be accompanied by an audible warning. Yellow warnings can identify operating malfunctions, insufficient operating fluids or other conditions that may affect vehicle operation or lead to damage if left unresolved. Although the warning does not necessarily require an immediate stop in every situation, the affected function should be checked as soon as possible. Follow any accompanying instructions, avoid operating the vehicle in a way that could aggravate the fault and seek professional assistance when necessary.
Reference to information in the owner's manual
This symbol indicates that further details about the displayed warning or operating condition are available in the vehicle's owner's manual. The instrument cluster may provide only a brief description of the problem, while the manual contains additional explanations, precautions and instructions relevant to the affected system. Consult the appropriate section to understand the warning correctly and determine what action is required. The manual should be used together with any immediate instructions shown on the instrument display.
Information message
Information messages describe processes, operating states or functions within the vehicle. Unlike warnings that identify a fault or potentially hazardous condition, these notifications may simply inform the driver that a particular system is operating, a function has changed status or a vehicle process is taking place. The exact content depends on the equipment and current operating conditions of the Seat Ibiza. Read the message in context and follow any instructions it contains, particularly if it relates to a function currently being used.
Date and time
Setting the time on the infotainment system
Settings. This provides access to the available configuration options, including those used
to adjust the vehicle's clock and date display. Make the adjustment while the vehicle is stationary to avoid
distraction.
Status display
Service MenuHonda Civic Service Manual. Front Grille Removal and Installation ('12, '13: 2-door, '14: 4-door)
1.
Front Bumper
1.
Remove the screws (A), the bolts (B), and the clips (C,
D) securing the front bumper (E).
...