Honda Civic manuals

Honda Civic Service Manual: Center Console Removal and Installation

Honda Civic Service Manual / Body / Body Interior / Consoles / Center Console Removal and Installation

Removal

1. M/T Shift Lever Knob

Except K24Z7 engine

1.

Except K24Z7 engine: Lower the shift lever boot (A) to release the hooks from the boot.

2.

Except K24Z7 engine: Remove the shift lever knob (B).

K24Z7 engine

3.

K24Z7 engine: Lower the shift lever boot (A) to release the hooks from the boot.

4.

K24Z7 engine: Loosen the shift lever boot ring (B).

5.

K24Z7 engine: Remove the shift lever knob (C).

6.

K24Z7 engine: Remove the shift lever boot ring.
2. Center Console Panel Assembly (M/T)

1.

Remove the center console panel (A).
3. Center Console Panel Assembly (A/T)

1.

Detach the clips (A).

2.

Remove the center console panel (A).
4. Cup Holder Panel Assembly

1.

Remove the cup holder panel assembly (A).
5. Center Console

1.

Remove the bolts (A).

2.

Disconnect the connector (B).

3.

Remove the console box mat (A).

4.

Remove the bolts (B).

5.

Disconnect the connector (A).

6.

Remove the center console (A).

Installation

1. Center Console

1.

Install the center console (A).

2.

Connect the connector (A).

3.

Install the bolts (A).

4.

Install the console box mat (B).

5.

Connect the connector (A).

6.

Install the bolts (B).
2. Cup Holder Panel Assembly

1.

Install the cup holder panel assembly (A).
3. Center Console Panel Assembly (A/T)

1.

Install the center console panel (A).

2.

Install the clips (A).
4. Center Console Panel Assembly (M/T)

1.

Install the center console panel (A).
5. M/T Shift Lever Knob

Except K24Z7 engine

1.

Except K24Z7 engine: Install the shift lever knob (A).

NOTE: Tighten the shift lever knob until the shift pattern is properly aligned.

2.

Except K24Z7 engine: Connect the shift lever boot (B).

K24Z7 engine

3.

K24Z7 engine: Install and turn the shift lever boot ring (A) until it reaches the bottom of the threads on the shift lever.

4.

K24Z7 engine: Turn the shift lever knob (B) until the shift lever knob contacts the shift lever boot ring.

5.

K24Z7 engine: Tighten the shift lever boot ring and the shift lever knob together with the shift pattern properly aligned.

6.

K24Z7 engine: Connect the shift lever boot (C).
Center Console Rear Trim Removal and Installation
8411G7 REAR Removal 1. Center Console Rear Trim 1. Remove the center console rear trim (A). ...

Cup Holders
...

See also:

Honda Civic Owners Manual. Windshield Wiper/Washer
The windshield wipers and washers can be used when the ignition switch is in ON *1. MIST The wipers run at high speed until you release the lever. Wiper switch (OFF, INT*2/AUTO*3, LO, HI) Move the lever up or down to change the wiper settings. Adjusting wiper operation* Turn the adjus ...

© 2016-2025 Copyright www.hocivic.com

0.0302