Honda Civic Service Manual: Tweeter Removal and Installation
014175 LEFT
014185 RIGHT
![](images/books/440/ba3801558678acbff3e57341c7096d6f.png)
Removal
NOTE: SRS components are located in this area. Review the SRS component
locations and the precautions and procedures before doing repairs or service.
|
1. |
Front Door Opening Seal as Needed |
![](images/books/440/6db4aa19b9662f8e9d033d1b5e6fa604.png)
|
|
1.
|
Remove the front door opening seal (A) as needed.
|
|
![](images/books/440/845f03081b769a476e1ddebacd3cb354.png)
|
|
1.
|
Pull out the A-pillar trim (A) to release the clips.
|
|
![](images/books/440/1c855bbf204f4d5e00a9099e160e1a42.png)
|
|
2.
|
Put a shop towel (A) in the opening between the A-pillar trim
(B) and the dashboard to prevent dropping the A-pillar clips.
|
|
![](images/books/440/f1d1d3d0f23c44fa039fb45822954ebf.png)
|
|
3.
|
Remove the A-pillar trim (A).
|
|
NOTE: The upper clip (B) will stay in the body.
|
|
![](images/books/440/612a0c5ad493c4a92917553114600ccb.png)
|
|
4.
|
Remove the upper clip (A) from the body.
|
|
![](images/books/440/3013c25d9d95a04d797d631e50e140ca.png)
|
|
1.
|
Remove the tweeter (A).
|
|
![](images/books/440/f740376d3f9f1776a937914799e742a9.png)
Installation
NOTE: SRS components are located in this area. Review the SRS component
locations and the precautions and procedures before doing repairs or service.
|
![](images/books/440/3013c25d9d95a04d797d631e50e140ca.png)
|
|
1.
|
Install the tweeter (A).
|
|
![](images/books/440/9e094cc3952ac086105d5794088e7885.png)
|
|
1.
|
Carefully install the new upper clip (A) to the A-pillar trim
(B).
|
|
![](images/books/440/75a70c11accaf87db37ad89106664441.png)
|
|
2.
|
Install the A-pillar trim (A).
|
|
NOTE:
|
|
![](images/books/440/ca917ac4d6580542ad28730916ef1daa.png)
|
Make sure the side curtain airbag is not tucked
under the clips or the trim ribs.
|
|
|
![](images/books/440/ca917ac4d6580542ad28730916ef1daa.png)
|
Do not push too hard on the A-pillar trim. If
you push too hard, the clip will be damaged, and
it will not hold the trim properly.
|
|
|
![](images/books/440/ca917ac4d6580542ad28730916ef1daa.png)
|
Gently tug on the A-pillar trim to verify that
all clips are securely fastened.
|
|
|
|
3. |
Front Door Opening Seal as Needed |
![](images/books/440/8b23bd2ab849495d4e8f959454be0ed4.png)
|
|
1.
|
Install the front door opening seal (A).
|
|
012140
Removal
NOTE: SRS components are located in this area. Review the SRS component
locations and the precautions and procedures before doing repairs or service.
...