Honda Civic manuals

Honda Civic Service Manual: Drive Belt Idler Pulley Base Removal and Installation (K24Z7)

Honda Civic Service Manual / Powertrain / Engine / Pulleys and Belts / Drive Belt Idler Pulley Base Removal and Installation (K24Z7)

Removal

1. Drive Belt

vnm

1.

Move the auto-tensioner (A) using the belt tension release tool in the direction of the arrow to relieve tension from the drive belt, then remove the drive belt.

2. Idler Pulley Base Assembly

1.

Remove the idler pulley base.

Installation

1. Idler Pulley Base Assembly

1.

Install the idler pulley base.

2. Drive Belt

vnm

1.

Install the drive belt.

Drive Belt Removal and Installation (K24Z7)
118130 Removal 1. Drive Belt vnm 1. Move the auto-tensioner (A) using the belt tension release tool in the d ...

Drive Belt Idler Pulley Removal and Installation (Except K24Z7)
1101V6 1. Drive Belt 1. Move the auto-tensioner (A) counterclockwise to relieve tension from the drive b ...

See also:

Honda Civic Service Manual. XM Antenna Removal and Installation (2-door)
015116 Removal NOTE: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. 1. Battery Terminal (SRS) - Disconnection ...

© 2016-2023 Copyright www.hocivic.com

0.1494