Honda Civic Service Manual: Fuel Pipe Protector Removal and Installation (Natural Gas models)
3101D5
|
|
1.
|
Raise the vehicle on a lift, and make sure it is securely supported.
|
|
|
|
|
1.
|
Remove the rear wheel.
|
|
| 3. |
Fuel Pipe Protector (Natural Gas Model) |
|
|
|
1.
|
Remove the fuel filler pipe protector (A).
|
|
| 1. |
Fuel Pipe Protector (Natural Gas Model) |
|
|
|
1.
|
Install the fuel filler pipe protector (A).
|
|
|
 15mmumum
|
|
1.
|
Install the rear wheel.
|
|
NOTE: Before installing the wheel, clean the mating surfaces
between the brake disc or the brake drum and the inside of the wheel.
|
|
3101D5
1.
Vehicle Lift
1.
Raise the vehicle on a lift, and make sure it is securely supported.
...
Drain
1.
Fuel Filler Cap
1.
Remove the fuel fill cap to relieve the pressure in the fuel
tank.
...
See also:
Honda Civic Owners Manual. When the System can be Used
The system can be used when the following conditions are met.
The lane in which you are driving has detectable lane markers on
both sides, and
your vehicle is in the center of the lane.
The vehicle speed is between 45 and 90 mph (72 and 145 km/h).
You are driving on a ...
Fuel Pipe Protector Removal and Installation (Except Natural Gas models)
Fuel Pressure Relieving (R18Z1)