Inspection
1. | A/C System - Contamination Inspection |
1. |
If A/C compressor failure is diagnosed, always use this inspection to check the extent of contamination in the A/C system. |
2. |
Remove the discharge hose (A) from the A/C compressor. Then, swab inside the discharge hose and A/C compressor discharge port with a cotton swab. |
|||||||||
|
3. |
Remove the suction hose (D) from the A/C compressor. Then, swab inside the suction hose and A/C compressor suction port with a cotton swab. |
|||||||||
|
4. |
Remove the receiver line (B) from the A/C condenser outlet. Then, swab inside the receiver line and A/C condenser outlet with a cotton swab. |
|||||||||
|
5. |
Remove the A/C lines (C) from the expansion valve. Then, swab inside the expansion valve and the A/C lines with a cotton swab |
|||||||||
|
6. |
Remove the discharge hose (A) from the A/C condenser inlet. Then, swab inside the discharge hose and A/C condenser inlet with a cotton swab. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Repair Procedure list
|
Honda Civic Owners Manual. To Switch ACC with LSF to Cruise Control
Press and hold the (interval)
button for one
second. Cruise Mode Selected appears on
the driver information interface for two
seconds, and then the mode switches to
Cruise.
To switch back to ACC with LSF, press and
hold the button again for one
second. ACC
Mode Selected appears on ...