Honda Civic manuals

Honda Civic Service Manual: Front Bumper Lower Molding Removal and Installation ('13-'14)

Honda Civic Service Manual / Body / Body Exterior / Bumpers / Front Bumper Lower Molding Removal and Installation ('13-'14)

1. Front Grille Cover

1.

Remove the front grille cover (A).

2.

If necessary, remove the front bumper upper duct (A).

2. Front Bumper

1.

Remove the screws (A), the clips (B), and the bolts (C) securing the front bumper (D).

2.

Pull out the front bumper (A) from the side spacer (B). Repeat this step on the opposite side.

3.

With the help of an assistant, pull out both sides of the front bumper (A) from the upper beam (B).

4.

With the help of an assistant, remove the front bumper (A).

3. Front Bumper Lower Molding

Except Si model

Si model

    Front Bumper Fog Light Cover Removal and Installation ('13-'14: 4-door)
    1. Front Fog Light Trim Except Si model Si model 1. ...

    Front Bumper Removal and Installation ('12, '13: 2-door)
    8101D5 1. Front Bumper ...

    See also:

    Honda Civic Owners Manual. Seat Belt Inspection
    Regularly check the condition of your seat belts as follows: Pull each belt out fully, and look for frays, cuts, burns, and wear. Check that the latch plates and buckles work smoothly and the belts retract easily. If a belt does not retract easily, cleaning the belt may correct the pro ...

    © 2016-2025 Copyright www.hocivic.com

    0.0062