Honda Civic Owners Manual: What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following order.
- Disconnect the jumper cable from your vehicle's ground.
- Disconnect the other end of the jumper cable from the booster battery - terminal.
- Disconnect the jumper cable from your vehicle's battery + terminal.
- Disconnect the other end of the jumper cable from the booster battery + terminal.
Have your vehicle inspected by a nearby service station or a dealer.
|
What to Do After the Engine Starts The VSA and CMBSTM* indicators may come on
when your turn the ignition switch to ON
Drive a short distance at more than12 mph (20 km/h). Each indicator should go off. If either or both do not, have your vehicle checked by a dealer. |
*1 after
re-connecting a battery.
Jump Starting Procedure
Turn off the power to electric devices, such as audio and lights. Turn off
the engine,
then open the hood.
Connect the first jumper cable to your
vehicle's battery + terminal.
Con ...
Shift Lever Does Not Move
Continuously variable transmission models
Follow the procedure below if you cannot move the shift lever out of the (P
position.
Releasing the Lock
Set the parking brake.
Models without s ...
See also:
Honda Civic Owners Manual. Front Side Marker Light Bulbs
When replacing, use the following bulbs.
Front Side Marker Light: 3 W
Push the tab to remove the light assembly.
Push the tab to remove the coupler.
Driver side
Turn the socket counter-clockwise to
remove it, then remove the old bulb.
Insert a new bulb.
Pas ...
