Removal
1. | Rear Seat Cushion |
|
|
|
|
2. | Both Rear Seat Side Bolsters |
|
|
|
|
3. | Both Rear Door Opening Seals as Needed |
|
|
4. | Both C-Pillar Trims |
|
|
|
|
Adjustment
1. | Trunk Lid Adjustment |
1. |
Release the hooks, then remove the rear panel cap (A). |
mu-ru
2. |
Slightly loosen the trunk lid hinge bolts (B) and the striker bolts (C). |
3. |
Adjust the trunk lid (D) alignment in the following sequence: |
|||||||||||||
|
4. |
Tighten each bolt to the specified torque. |
5. |
Make sure the trunk lid opens properly and locks securely. |
Installation
1. | Both C-Pillar Trims |
|
|
|
|
2. | Both Rear Door Opening Seals as Needed |
|
|
3. | Both Rear Seat Side Bolsters |
|
|
mmmmlnss |
|
4. | Rear Seat Cushion |
|
|
|
|
Honda Civic Service Manual. Center Console Panel Removal and Installation
Removal
1.
M/T Shift Lever Knob
Except K24Z7 engine
1.
Except K24Z7 engine: Lower the shift lever boot (A) to release
the hooks from the boot.
2.
...