Honda Civic Owners Manual: To Set the Vehicle Speed
Take your foot off the pedal and press the -/SET button when you reach the desired speed.
The moment you release the -/SET button, the set speed is fixed, and cruise control begins. The CRUISE CONTROL indicator comes on.
During cruise control, Straight Driving Assist Function is activated. This control function is an EPS function and it helps reduce the steering effort to keep the steering angle on a straight road with cants.
To Adjust the Vehicle Speed
Each time you press the RES/+ or -/SET button, the vehicle speed is increased or decreased by about 1 mph (1.6 km/h).
If you keep the RES/+ or -/SET button pressed, the vehicle speed increases or decreases until you release it. This speed is then set.
To Switch ACC with LSF to Cruise Control
Press and hold the (interval)
button for one
second. Cruise Mode Selected appears on
the driver information interface for two
seconds, and then the mode switches to
Cruise.
To switch bac ...
To Cancel
To cancel cruise control, do any of the following:
Press the CANCEL button.
Press the MAIN button.
Depress the brake pedal.
The CRUISE CONTROL indicator goes off.
...
See also:
Honda Civic Service Manual. Gauge Control Module (Speedo) Removal and Installation ('13)
1.
Driver's Outer Vent
1.
Remove the driver's outer vent (A).
2.
If necessary, remove the du ...
