Honda Civic Service Manual: Side Engine Mount Removal and Installation (K24Z7)
1121A5 ENGINE SIDE
Removal
|
|
1.
|
Disconnect the intake air duct (A) and the intake air pipe (B).
|
|
2.
|
Remove the harness clamp (C).
|
|
3.
|
Remove the air cleaner (D).
|
|
2. |
Engine Jack Support (State Of A Low Vehicle) |
|
|
1.
|
Lift and support the engine with a jack and a wood block under
the oil pan.
|
|
|
|
1.
|
Remove the upper torque rod.
|
|
|
|
1.
|
Remove the ground cable (A), the side engine mount bracket (B),
and the side engine mount (C).
|
|
Installation
replace.(s.nm,
|
|
1.
|
Install the new side engine mount mounting bolts (A) and the
side engine mount bracket (B) using a nut and a new bolt, then loosely
install the new side engine mount bracket mounting bolts and nut
(C).
|
|
2.
|
Install the ground cable (D).
|
|
2. |
Engine Jack Support (State Of A Low Vehicle) |
|
|
1.
|
Remove the jack and the wood block.
|
|
3. |
Transmission Mount - Loosen |
|
|
1.
|
Loosen the transmission mount bracket bolt and nuts (A).
|
|
|
|
1.
|
Raise the vehicle on a lift, and make sure it is securely supported.
|
|
5. |
Lower Torque Rod Mounting Bolt - Loosen |
|
|
1.
|
Loosen the lower torque rod mounting bolt (A).
|
|
6. |
Side Engine Mount - Tighten |
-.smmn-m
|
|
1.
|
Tighten the side engine mount bracket mounting bolt and nut.
|
|
7. |
Transmission Mount - Tighten |
:2mmn-m
|
|
1.
|
Tighten the transmission mount bracket mounting bolt and nuts.
|
|
8. |
Lower Torque Rod Mounting Bolt - Tighten |
|
|
1.
|
Loosen the lower torque mount mounting bolt.
|
|
2.
|
Tighten the lower torque rod mount mounting bolts in the numbered
sequence shown.
|
|
mmreplace.mm
|
|
1.
|
Install the upper torque rod using new bolts.
|
|
2.
|
Tighten the upper torque rod mounting bolts in the numbered sequence
shown.
|
|
|
|
1.
|
Install the air cleaner (A).
|
|
2.
|
Install the harness clamp (B).
|
|
3.
|
Connect the intake air pipe (C) and the intake air duct (D).
|
|
112101
1.
Vehicle Lift
1.
Raise the vehicle on a lift, and make sure it is securely supported.
...
See also:
Honda Civic Owners Manual. Resetting the Display
Reset the maintenance minder information display if you have performed the
maintenance service.
Turn the ignition switch to ON
and have
the vehicle at a complete stop.
Display the Maintenance Minder by
repeatedly pressing the (TRIP)
knob.
Press and hold the ...