Honda Civic manuals

Honda Civic Service Manual: Radiator Fan Motor Removal and Installation (Except K24Z7)

Honda Civic Service Manual / Powertrain / Engine / Engine Cooling / Radiator Fan / Radiator Fan Motor Removal and Installation (Except K24Z7)

1151A2

1. Battery Terminal - Disconnection


1.

Make sure the ignition switch is in LOCK (0), or the vehicle ignition in the OFF mode.


2.

Disconnect and isolate the negative cable with the battery sensor (A) from the battery.


NOTE:

Always disconnect the negative side first.

To protect the battery sensor connector (B) from damage, do not hold it when removing the negative terminal.

Do not disconnect the battery sensor from the negative terminal (C).


3.

Disconnect the positive cable (D) from the battery.


2. Battery

1.

Remove the battery setting plate (A) and the battery (B).


3. Battery Base Assembly


1.

Remove the harness clamp (A).


2.

Remove the battery base (B).


4. Front Grille Cover

1.

Remove the front grille cover (A).


2.

If necessary, remove the front bumper upper duct (A).


5. Coolant Reservoir


1.

Disconnect the coolant reservoir hose (A).


2.

Remove the coolant reservoir (B).


6. Radiator Mounting Bracket, Upper Both

1.

Remove the radiator mount upper brackets/cushions (A), and the A/C condenser upper mount brackets (B).


7. Bulkhead - Removal


1.

Disconnect the connectors (A).


2.

Remove the harness clamps (B).


3.

Remove the bulkhead (A).


8. A/C Condenser Fan Shroud Assembly

1.

Remove the A/C condenser fan shroud assembly (A).


9. Radiator Fan Shroud Assembly

1.

Remove the radiator fan shroud assembly (A).


10. Radiator Fan

1.

Remove the radiator fan (A) from the radiator fan motor (B).


11. Radiator Fan Motor

1.

Remove the radiator fan motor (A) from the radiator fan shroud (B).


1. Radiator Fan Motor

1.

Install the radiator fan motor (A) to the radiator fan shroud (B).


2. Radiator Fan

1.

Install the radiator fan (A) to the radiator fan motor (B).


3. Radiator Fan Shroud Assembly

1.

Install the radiator fan shroud assembly (A).


4. A/C Condenser Fan Shroud Assembly

1.

Install the A/C condenser fan shroud assembly (A).


5. Bulkhead - Installation

1.

Install the bulkhead (A).



2.

Install the harness clamps (A).


3.

Connect the connectors (B).


6. Radiator Mounting Bracket, Upper Both

1.

Install the radiator mount upper bracket/cushion (A), and the brackets (B).


7. Coolant Reservoir


1.

Install the coolant reservoir (A).


2.

Connect the coolant reservoir hose (B).


8. Front Grille Cover

1.

Install the front bumper upper duct (A).


2.

Install the front grille cover (A).


9. Battery Base Assembly

mm22mminu.om.7mm


1.

Install the battery base (A).


2.

Install the harness clamp (B).


10. Battery

1.

Install the battery (A) and the battery setting plate (B).


NOTE: Do not deform the battery setting plate by over-tightening the nuts.


11. Battery Terminal - Reconnection


NOTE: If the battery performs abnormally, test the battery.


1.

Clean the battery terminals.


2.

Connect the positive cable (A) to the battery.


NOTE: Always connect the positive side first.


3.

Connect the negative cable and the battery sensor (B) to the battery.


NOTE: To protect the battery sensor connector (C) from damage, do not hold it when installing the negative terminal.


4.

Apply multipurpose grease to the terminals to prevent corrosion.


Radiator Fan
...

Radiator Fan Motor Removal and Installation (K24Z7)
1. Air Cleaner Assembly 1. Disconnect the intake air duct (A) and the intake air pipe (B). ...

See also:

Honda Civic Owners Manual. Side Curtain Airbags
The side curtain airbags help protect the heads of the driver and passengers in the outer seating positions during a moderate-to-severe side impact. The side curtain airbags equipped in this vehicle are also designed to help reduce the likelihood of partial and complete ejection of vehicle ...

© 2016-2024 Copyright www.hocivic.com

0.0081