Removal
1. | Front Door Power Window Switch Panel (4-door) |
|
|
2. | Front Door Power Window Switch - Driver's Side |
|
|
Installation
1. | Front Door Power Window Switch - Driver's Side |
|
|
2. | Front Door Power Window Switch Panel (4-door) |
|
|
3. | Power Window Control Unit - Reset |
Resetting the power window is required when any of the following have occurred: |
|
|||
|
|||
|
|||
|
|||
|
1. |
Turn the ignition switch to ON (II). |
2. |
Move the driver's window all the way down with the driver's window DOWN switch. |
3. |
Open the driver's door. |
|
NOTE: Steps 4-7 must be done within 5 seconds of each other. |
4. |
Turn the ignition switch to LOCK (0). |
armounupnwlrwindnwdawdawnswiich
5. |
Push and hold the driver's window DOWN switch. |
6. |
Turn the ignition switch to ON (II). |
7. |
Release the driver's window DOWN switch. |
8. |
Repeat step 4-7 three more times. |
9. |
Wait at least 1 second. |
10. |
Confirm that AUTO UP and AUTO DOWN do not work. If AUTO UP and DOWN work, go back to step 1. |
11. |
Move the driver's window all the way down with the driver's window DOWN switch. |
12. |
Pull up and hold the driver's window UP switch until the window reaches the fully closed position, then continue to hold the switch for at least 1 second. |
13. |
Confirm that the power window control unit is reset by using the driver's window AUTO UP and AUTO DOWN functions: |
|||||||||
|
Honda Civic Service Manual. Lift and Support Points
NOTE: If you are going to remove heavy components such
as the suspension or the fuel tank from the rear of the
vehicle, first support the front of the vehicle with tall
safety stands. When substantial weight is removed from the
rear of the vehicle, the center of gravity c ...