Honda Civic Service Manual: License Plate Light Removal and Installation - Double Lights ('13-'14:
4-door)
|
|
|
1.
|
Remove the trunk lid trim panel (A).
|
|
|
|
|
1.
|
Disconnect the connectors.
|
|
2.
|
Remove the inner taillight (A).
|
|
3.
|
Remove the gasket (B) from the inner taillight.
|
|
|
|
|
2.
|
Remove the rear license trim (A).
|
|
|
|
|
1.
|
Push the license plate light assembly (A) to the side
to release the retaining spring (B), and pull out the license
plate light assembly.
|
|
|
|
|
2.
|
Disconnect the connector.
|
|
3.
|
Separate the lens (A) from the housing (B).
|
|
|
|
|
2.
|
Install the lens (B) on the housing (C).
|
|
3.
|
Connect the connector.
|
|
|
|
|
4.
|
Insert the hook (A), then lightly push the license plate
light assembly (B) in to install it.
|
|
|
|
|
1.
|
Install the rear license trim (A).
|
|
|
|
|
2.
|
Install the bolts (A).
|
|
|
|
|
1.
|
Install the gasket (A) to the inner taillight (B).
|
|
NOTE: Inspect the gasket, replace it if it is distorted
or stays compressed.
|
|
2.
|
Install the inner taillight.
|
|
3.
|
Connect the connectors.
|
|
|
|
|
1.
|
Install the trunk lid trim panel (A).
|
|
Removal
1.
License Plate Light Assembly
1.
Push the license pl ...
8141D0
Removal
1.
Moonroof Link Cover Both
1.
Remove th ...
See also:
Honda Civic Owners Manual. Limitations for Manual Operation
Certain manual functions are disabled or inoperable while the vehicle is in
motion.
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed dial entries can be called using voice commands
while
the vehicle is in motion.
HFL Status Displ ...
License Plate Light Removal and Installation (2-door)
Moonroof Drain Channel Removal and Installation (4-door)