Honda Civic Owners Manual: Inspecting and Changing Fuses
- Turn the ignition switch to LOCK 0*1. Turn headlights and all accessories off.
- Remove the fuse box cover.
- Check the large fuse in the engine
compartment.
► If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.
- Inspect the small fuses in the engine
compartment and the vehicle interior.
► If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
|
Inspecting and Changing Fuses NOTICE Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system. There is a fuse puller on the back of the engine compartment fuse box cover. |
Interior Fuse Box
Located under the dashboard.
Fuse locations are shown on the label on
the side panel.
Locate the fuse in question by the fuse
number and label number.
Circuit protected and fuse rating
...
Emergency Towing
Call a professional towing service if you need to tow your vehicle.
Flat bed equipment
The operator loads your vehicle on the back of a truck.
This is the best way to transport your vehicle ...
See also:
Honda Civic Owners Manual. Displaying Messages
Displaying text messages
Go to the Phone menu screen.
Select Text/Email.
Select account if necessary.
Select a message.
The text message is displayed. The
system automatically starts reading the
message aloud.
Displaying Mes ...
