Honda Civic manuals

Honda Civic Service Manual: Engine Oil Pressure Switch Removal and Installation (Except K24Z7)

Honda Civic Service Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / Engine Control Sensors / Engine Oil Pressure Switch Removal and Installation (Except K24Z7)

723120

Removal

1. Oil Pressure Switch


1.

Remove the oil pressure switch (A).

2.

Remove any old liquid gasket from the switch mounting hole.

Installation

1. Oil Pressure Switch


1.

Apply liquid gasket (P/N 08718-0004 or 08718-0009) to the oil pressure switch threads. Install the component within 5 minutes of applying the liquid gasket.

NOTE:

Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the oil pressure switch.

If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.

2.

Install the oil pressure switch (A).

ECT Sensor 2 Removal and Installation (K24Z7)
1201D5 RADIATOR 1. Radiator Cap 1. Wait until the engine is cool, then carefully remove the radiator cap. ...

Engine Oil Pressure Switch Removal and Installation (K24Z7)
723120 Removal 1. Oil Pressure Switch 1. Remove the oil pressure switch (A). ...

See also:

Honda Civic Owners Manual. Fuel Information
Fuel recommendation Unleaded gasoline, pump octane number 87 or higher Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage. Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, ...

© 2016-2024 Copyright www.hocivic.com

0.0254