Honda Civic Service Manual: Connecting Rod Bolt Inspection (Except K24Z7)
Honda Civic Service Manual / Powertrain / Engine / Engine Block / Cylinder Block / Connecting Rod Bolt Inspection (Except K24Z7)
Inspection
| 1. | Connecting Rod Bolt - Inspection |
|
1. |
Measure the diameter of each connecting rod bolt at point A and point B. |
:5mmzommin)
|
2. |
Calculate the difference in diameter between point A and point B. |
|||||||||
|
||||||||||
|
3. |
If the difference in diameter is out of specification, replace the connecting rod bolt. |
Connecting Rod Bearing Replacement (R18Z1)
Removal
1.
Intake Manifold and Throttle Body Assembly
1.
Remove the intake air duct.
...
Connecting Rod Bolt Inspection (K24Z7)
Inspection
1.
Connecting Rod Bolt - Inspection
1.
Measure the diameter of each connecting rod bolt at point A and point
B.
35mmzomm
...
See also:
Honda Civic Owners Manual. To Set the Vehicle Speed
When driving at 25 mph (40 km/h) or above: Take your foot off the pedal and
press the -/SET button when you reach the desired speed. The moment you release
the button, the set speed is fixed, and ACC with LSF begins.
When driving slower than 25 mph (40 km/h): If the vehicle is moving and th ...
© 2016-2022 Copyright www.hocivic.com
0.1396