Honda Civic Service Manual: Battery Terminal Disconnection and Reconnection
Removal
1. |
Battery Terminal - Disconnection |
|
|
1.
|
Make sure the ignition switch is in LOCK (0).
|
|
2.
|
Disconnect and isolate the negative cable and battery sensor
(A) from the battery.
|
|
NOTE: Always disconnect the negative side first.
|
|
3.
|
Disconnect the positive cable (B) from the battery.
|
|
Installation
1. |
Battery Terminal - Reconnection |
|
NOTE: If the battery performs abnormally, test the battery.
|
|
1.
|
Clean the battery terminals.
|
|
2.
|
Connect the positive cable (A) to the battery.
|
|
NOTE: Always connect the positive side first.
|
|
3.
|
Connect the negative cable and battery sensor (B) to the battery.
|
|
4.
|
Apply multipurpose grease to the terminals to prevent corrosion.
|
|
Removal
1.
Battery Terminal - Disconnection
1.
Make sure the ignition switch is in LOCK (0).
...
Removal
1.
Battery Terminal - Disconnection
1.
Make sure the ignition switch is in LOCK (0).
...
See also:
Honda Civic Owners Manual. Brightness Control
When the parking lights are turned on and the
ignition switch is in ON *1, you can
use the
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or ...