Removal
1. | Transmission Range Switch Cover |
|
2. | Transmission Range Switch |
|
|
3. | Transmission Range Switch Subharness |
|
|
4. | ATF Warmer Bracket |
|
5. | Transmission End Cover |
|
6. | Input Shaft (Mainshaft) Speed Sensor |
|
7. | Output Shaft (Countershaft) Speed Sensor |
|
8. | A/T Clutch Pressure Control Solenoid Valve A |
|
9. | A/T Clutch Pressure Control Solenoid Valve B and C |
|
10. | ATF Filter Assembly |
|
|
11. | A/T Solenoid Cover |
|
12. | A/T Shift Solenoid Wire Harness - Disconnection |
|
13. | ATF Pipe |
|
|
14. | End Cover Idler Gear Assembly |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15. | A/T Transmission Housing |
|
|
16. | Transmission Housing Countershaft Bearing |
n77ls-nnlnnnn |
|
Installation
NOTE: Apply a light coat of clean ATF on all moving parts before installation. |
1. | Transmission Housing Countershaft Bearing |
|
|
a-nu) |
|
2. | A/T Transmission Housing |
1a1.2:mmmn!(4.: |
|
3. | End Cover Idler Gear Assembly |
|
|
|
|
|
|
|
|
o7aacxfnmoa |
|
|
|
|
|
|
|
|
|
|
29. |
If the measurement is out of the standard, select and install the appropriate park lever stop (A) from the table. |
PARK LEVER STOP
|
30. |
After replacing the park lever stop, make sure the distance is within the tolerance. |
|
4. | ATF Pipe |
|
|
5. | A/T Shift Solenoid Wire Harness - Reconnection |
lve.l(camwur, |
|
6. | A/T Solenoid Cover |
inmm |
|
7. | ATF Filter Assembly |
1. |
Install the ATF inlet line/ATF hose/ATF filter assembly (A). |
himm12mm
2. |
Install the banjo bolt (B) using new sealing washers (C). |
8. | A/T Clutch Pressure Control Solenoid Valve B and C |
|
|
9. | A/T Clutch Pressure Control Solenoid Valve A |
mmi11 |
|
10. | Output Shaft (Countershaft) Speed Sensor (A/T) |
|
11. | Input Shaft (Mainshaft) Speed Sensor |
|
12. | Transmission End Cover |
mm12u....um,!mk) |
|
13. | ATF Warmer Bracket |
mm27lhf! |
|
14. | Transmission Range Switch Subharness |
|
|
15. | Transmission Range Switch |
|
|
|
|
|
16. | Transmission Range Switch Cover |
mmnm |
|
Honda Civic Owners Manual. Airbag Care
You do not need to, and should not, perform any maintenance on or replace any
airbag system components yourself. However, you should have your vehicle
inspected by a dealer in the following situations:
When the airbags have deployed
If an airbag has inflated, the control unit and other related p ...