Honda Civic manuals

Honda Civic Service Manual: Trunk Lid Latch Removal and Installation

Honda Civic Service Manual / Body / Doors and Enclosures / Trunklid/Tailgate/Cargo Doors / Trunk Lid Latch Removal and Installation

8171B6

Removal

1. Trunk Lid Trim Panel

1.

For some models: Remove the trunk lid trim panel (A).

2. Trunk Lid Latch

1.

Remove the latch cover (A).

2.

Remove the trunk lid latch (B).

3.

With trunk lid lock cylinder: Disconnect the cylinder rod (C).

4.

Disconnect the trunk lid opener cable (A).

Installation

1. Trunk Lid Latch

NOTE: Fix the original position of the outer end of the cable (A) on the trunk lid latch securely. And check the trunk lid latch operation: Make sure the trunk lid latch unlocks when pulling the trunk lid opener/fuel fill door opener. If necessary, adjust the position of the cable end.

1.

Connect the trunk lid opener cable (A).

2.

With trunk lid lock cylinder: Connect the cylinder rod (A).

3.

Install the trunk lid latch (B).

4.

Install the latch cover (C).

2. Trunk Lid Trim Panel

1.

For some models: Install the trunk lid trim panel (A).

Trunk Lid Torsion Bar Removal and Installation (Except Natural Gas models)
8231B8 Removal 1. Trunk Lid Torsion Bar 1. Remove the r ...

Trunk Lid Opener Cable/Fuel Fill Door Opener Cable Removal and Installation (4-door except Natural Gas models)
823160 SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. ...

See also:

Honda Civic Service Manual. Cylinder Bore Honing (R18A9)
Removal 1. Intake Manifold and Throttle Body Assembly (Natural Gas Model) 1. Remove the intake air duct. 2. Remove the heater ...

© 2016-2018 Copyright www.hocivic.com