Honda Civic manuals

Honda Civic Service Manual: Rocker Arm Oil Pressure Sensor (EOP Sensor) Removal and Installation (Except K24Z7 and R18Z1 (CVT))

Honda Civic Service Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / Rocker Arm Oil Pressure Sensor (EOP Sensor) Removal and Installation (Except K24Z7 and R18Z1 (CVT))

1211K2

1. EOP Sensor

1.

Remove the bracket (A) and the EOP sensor (B).


1. EOP Sensor

(2m,inu.n

1.

Install the EOP sensor (A) with a new O-ring (B) and the bracket (C).


Idle Speed Inspection (R18Z1)
1215M6 Inspection 1. HDS DLC - Connection 1. Connect the HDS to the data link connector (DLC) (A) located ...

Injector Control Module Removal and Installation (R18A9)
Removal 1. Injector Control Module (Natural Gas Model) 1. Remove the injector control module (A). ...

See also:

Honda Civic Owners Manual. What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following order.  Disconnect the jumper cable from your vehicle's ground.  Disconnect the other end of the jumper cable from the booster battery - terminal.  Disconnect the jumper cable from your v ...

© 2016-2020 Copyright www.hocivic.com

0.006